TNX Slon for the quick reply The resistance from pin 6 to 5 and six to 4 is 8.8 ohms and the voltage are the same is 23.4 vac which probably rules out high resistance on the up pin + I check the plug

Any other suggestions??

nick

Cell 337 258 2527

Helping UL become a world Class Engineering and Educational School Disagree I Learn

-----Original Message----- From: Sloan Davis blkupspilot@mac.com Sent: Tuesday, June 25, 2019 7:42 AM To: Nick Pugh quadpugh@bellsouth.net Subject: Re: [amsat-bb] Yaesu g5500 rotator issue

Check the “plug / din” connection in the wires to the box. Mine did similar things until I made sure the wires in those plug connectors were snug.. Now, no more issues...

Sent from my iPhone

On Jun 25, 2019, at 6:24 AM, Nick Pugh via AMSAT-BB amsat-bb@amsat.org wrote:

My g5500 rotator fails intermittently to start in the up position however momentarily pulse in in the down position it will act normally for several minutes.

Any suggestions on how to fix it?

nick

Cell 337 258 2527

Helping UL become a world Class Engineering and Educational School Disagree I Learn

---

Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb