I have been unable to copy any telemetry from AO-85. I read that a cable from Data2 Port of the IC-9100 to the sound card input on a PC was all that was needed to copy the data. I have wired a cable from pin 4 9600 bps Data Out of the 9100 to the tip of the sound card input and from Pin 2 ground of the 9100 to the sleeve of the sound card input. I have selected the correct sound card from the FOX Telem software and depress the start button. I have not copied one single packet with this setup.

Has anyone been successful using a IC-9100 and a sound card to copy the data? Any ideas what I could try?

Thanks for any help.

73, Frank K6FW