Hello,
I am trying to set the Wisp on Windows 10 but having problems
to get the settings permanent.
If I go into Tracking and select the satellites I want to have under eyes,
When I close the GSC and shut down the PC on the next
Start-up of the PC and the Wisp program, I get the lower part of the GSC program
Empty. I have to go again in the tracking tab and select again the satellites but
At the next shut down and restart I am again at the beginning point.
What to do to get them permanent?
Thanks
73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520
*********************************
****** GSM +39 328 7110193 ******
***** SMS +39 328 7110193 *****
*********************************
I have the same problem. It is registry related since there is multiple locations in the Windows 10 registry it tries to store the data. I find that If I enter just one satellite (I usually use AO-07), then exit and restart GSC, all of the satellites are back (until maybe the next reboot). If there is a software update to Windows 10 it almost always needs to be done again as I did above.
I don't think WISP32 is supported any longer so not sure this problem will get fixed.
Reid, W4UPD
On 6/3/2018 12:31 PM, Vincenzo Mone wrote:
Hello,
I am trying to set the Wisp on Windows 10 but having problems
to get the settings permanent.
If I go into Tracking and select the satellites I want to have under eyes,
When I close the GSC and shut down the PC on the next
Start-up of the PC and the Wisp program, I get the lower part of the GSC program
Empty. I have to go again in the tracking tab and select again the satellites but
At the next shut down and restart I am again at the beginning point.
What to do to get them permanent?
Thanks
73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520
********************************* ****** GSM +39 328 7110193 ****** ***** SMS +39 328 7110193 ***** *********************************
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Hello Enzo, I am only guessing but do have Gsc.exe running as administrator? I used “right click” and made all .exe files in the Wisp directory to run as administrator always. Please do that first and try again.
73, Mark N8MH.
On Sun, Jun 3, 2018 at 12:49 PM Vincenzo Mone [email protected] wrote:
Hello,
I am trying to set the Wisp on Windows 10 but having problems
to get the settings permanent.
If I go into Tracking and select the satellites I want to have under eyes,
When I close the GSC and shut down the PC on the next
Start-up of the PC and the Wisp program, I get the lower part of the GSC program
Empty. I have to go again in the tracking tab and select again the satellites but
At the next shut down and restart I am again at the beginning point.
What to do to get them permanent?
Thanks
73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520
********************************* ****** GSM +39 328 7110193 ****** ***** SMS +39 328 7110193 ***** *********************************
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Makes no difference. That was the first thing I tried. Then I started investigating the multiple locations that some of the WISP data was located in the registry. I found that I also had to add my station info back in and then I would get the satellite tracking data in the lower part. Just got use to having to make the previously mentioned inserts and then everything worked again.
Reid, W4UPD
On 6/3/2018 1:25 PM, Mark L. Hammond wrote:
Hello Enzo, I am only guessing but do have Gsc.exe running as administrator? I used “right click” and made all .exe files in the Wisp directory to run as administrator always. Please do that first and try again.
73, Mark N8MH.
On Sun, Jun 3, 2018 at 12:49 PM Vincenzo Mone [email protected] wrote:
Hello,
I am trying to set the Wisp on Windows 10 but having problems
to get the settings permanent.
If I go into Tracking and select the satellites I want to have under eyes,
When I close the GSC and shut down the PC on the next
Start-up of the PC and the Wisp program, I get the lower part of the GSC program
Empty. I have to go again in the tracking tab and select again the satellites but
At the next shut down and restart I am again at the beginning point.
What to do to get them permanent?
Thanks
73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520
********************************* ****** GSM +39 328 7110193 ****** ***** SMS +39 328 7110193 ***** *********************************
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
participants (3)
-
Mark L. Hammond -
Vincenzo Mone -
w4upd