Did a full reset on the radio but must have lost a setting.
I am able to CAT connect w/HRD. Set the baud rate to match radio/HRD/Satpc32.
In HRD, I can trigger SAT but the radio is not reading the frequencies (check boxes are checked). In SATPC32, I am not able to trigger the SAT function. (baud rate matches radio)
All was well in the past. I think I am missing something on the radio side. Cable connections all tight
Any help appreciated
Ted
K7TRK
On 6/28/2014 5:43 PM, Ted wrote:
Did a full reset on the radio but must have lost a setting.
Years ago I had a bad problem with static electric. Put a strip of grounded copper 4in X 6in on the outside of the shack door. Just about chest hi one touch on the way in and never had a problem. That was back in the days of the 7400 type IC's. My heating A/C man said that adding a humidifier would help also and it did.
John
Chesapeake Amateur radio Service W4CAR operated FD 3A not 2A as first stated. K4AMG was the GOTA and SAT Station 3A VA.
participants (3)
-
John Becker -
Rich/wa4bue -
Ted