Hi Folks,
Wonder if anyone can help me? I am running SATPC ver 12.8 under Win XP. In the past I have had great success with controlling my radio (an ICOM 910H) but recently the control has stopped for no apparant reason.
When I press the C+ button the radio goines into Sat mode OK, but the freq/modes dont change. I have stared and stared at the Doppler.SQF file, and cant see any error. I have double and triple checked things like CAT control baud rates etc etc.
Can anyone suggest what else I should be checking? Its very stange as the radio goes into sat mode, but just doesnt seem to set to the correct freqs/modes.
73 Jim
Hi,
Do you see the uplink and downlink frequencies displayed properly in the upper center of SatPC32 screen when you choose a satellite or you do not see nothing ???
2009/8/3 Jim Heck jim@milnet.uk.net:
Hi Folks,
Wonder if anyone can help me? I am running SATPC ver 12.8 under Win XP. In the past I have had great success with controlling my radio (an ICOM 910H) but recently the control has stopped for no apparant reason.
When I press the C+ button the radio goines into Sat mode OK, but the freq/modes dont change. I have stared and stared at the Doppler.SQF file, and cant see any error. I have double and triple checked things like CAT control baud rates etc etc.
Can anyone suggest what else I should be checking? Its very stange as the radio goes into sat mode, but just doesnt seem to set to the correct freqs/modes.
73 Jim
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (2)
-
Jean-François Ménard -
Jim Heck