Is anyone on the list using a FLEX radio to decode the 9.k kbs sats and if so what software are you using?
Thanks
nick
Office 337 593 8700
Cell 337 258 2527
Helping UL become a world Class Engineering and Educational School
Nick,
According to Flex, the data through VAC has the standard voice pre/post emphasis filtering and limiting, which should make 9600 baud problematic. They do have a request in for a way to bypass all that. The equivalent of the direct connections in conventional rigs. This does have applicability to WINLINK as well, which helps our case. Probably not in the upcoming "60 meter" PowerSDR release, but perhaps in the next. Both MixW and AGWPE are known to work well at 9600 baud, so that is what I am planning to use. They already work fine at 1200 baud.
73s,
Alan WA4SCA
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Nick Pugh Sent: Sunday, February 26, 2012 4:29 AM To: amsat-bb@amsat.org Subject: [amsat-bb] flex ?
Is anyone on the list using a FLEX radio to decode the 9.k kbs sats and if so what software are you using?
Thanks
nick
Office 337 593 8700
Cell 337 258 2527
Helping UL become a world Class Engineering and Educational School
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
TNx Alan
It does not appear much audio is coming out of the VAC port when drying to decode 9.6 kbs FLEX dimo this rig as satellite ready over a year ago it is time for them to keep their promise.
nick
-----Original Message----- From: Alan P. Biddle [mailto:APBIDDLE@UNITED.NET] Sent: Sunday, February 26, 2012 7:20 AM To: 'Nick Pugh'; amsat-bb@amsat.org Subject: RE: [amsat-bb] flex ?
Nick,
According to Flex, the data through VAC has the standard voice pre/post emphasis filtering and limiting, which should make 9600 baud problematic. They do have a request in for a way to bypass all that. The equivalent of the direct connections in conventional rigs. This does have applicability to WINLINK as well, which helps our case. Probably not in the upcoming "60 meter" PowerSDR release, but perhaps in the next. Both MixW and AGWPE are known to work well at 9600 baud, so that is what I am planning to use. They already work fine at 1200 baud.
73s,
Alan WA4SCA
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Nick Pugh Sent: Sunday, February 26, 2012 4:29 AM To: amsat-bb@amsat.org Subject: [amsat-bb] flex ?
Is anyone on the list using a FLEX radio to decode the 9.k kbs sats and if so what software are you using?
Thanks
nick
Office 337 593 8700
Cell 337 258 2527
Helping UL become a world Class Engineering and Educational School
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Change the RX Gain in Setup Audio VAC
Craig
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Nick Pugh Sent: Sunday, February 26, 2012 8:33 AM To: APBIDDLE@MAILAPS.ORG; amsat-bb@amsat.org Subject: [amsat-bb] Re: flex ?
TNx Alan
It does not appear much audio is coming out of the VAC port when drying to decode 9.6 kbs FLEX dimo this rig as satellite ready over a year ago it is time for them to keep their promise.
nick
There is plenty of white noise when there is no signal however when there is signal clearly present on the pan adapter the is almost no audio coming out of the VAC port.
nick
-----Original Message----- From: Craig Gagner [mailto:crgagner@charter.net] Sent: Sunday, February 26, 2012 8:04 AM To: 'Nick Pugh'; APBIDDLE@MAILAPS.ORG; amsat-bb@amsat.org Subject: RE: [amsat-bb] Re: flex ?
Change the RX Gain in Setup Audio VAC
Craig
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Nick Pugh Sent: Sunday, February 26, 2012 8:33 AM To: APBIDDLE@MAILAPS.ORG; amsat-bb@amsat.org Subject: [amsat-bb] Re: flex ?
TNx Alan
It does not appear much audio is coming out of the VAC port when drying to decode 9.6 kbs FLEX dimo this rig as satellite ready over a year ago it is time for them to keep their promise.
nick
participants (3)
-
Alan P. Biddle -
Craig Gagner -
Nick Pugh