G-5400/5500 Cross-Boom U-Bolts
Greetings, all
I'm "improving" my elevation rotor setup, and I'm wondering what others are using to secure the cross-boom inside the elevation rotor.
I've been using stainless hose clamps, and they work kinda-sorta OK, but have a tendency to slip. I'd really like to get either some proper size u-bolts, or the part numbers from the clamps Yaesu supplies with the rotor.
They appear to be 54mm / 2-1/8" inside-the-legs, and I'm coming up blank on searching for some.
There are no part numbers for the clamps in the manuals I have for the rotors.
I have FOUR elevation rotors, and NO clamps!
Seems like the clamps always get lost when people take these apart to sell.
Thanks!
73, Jim KQ6EA
Muffler clamps. There are some that fit perfectly and work great!
73, Joe kk0sd
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jim Jerzycke Sent: Sunday, July 03, 2011 2:20 PM To: [email protected] Subject: [amsat-bb] G-5400/5500 Cross-Boom U-Bolts
Greetings, all
I'm "improving" my elevation rotor setup, and I'm wondering what others are using to secure the cross-boom inside the elevation rotor.
I've been using stainless hose clamps, and they work kinda-sorta OK, but have a tendency to slip. I'd really like to get either some proper size u-bolts, or the part numbers from the clamps Yaesu supplies with the rotor.
They appear to be 54mm / 2-1/8" inside-the-legs, and I'm coming up blank on searching for some.
There are no part numbers for the clamps in the manuals I have for the rotors.
I have FOUR elevation rotors, and NO clamps!
Seems like the clamps always get lost when people take these apart to sell.
Thanks!
73, Jim KQ6EA _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Yep, I found some on eBay that are advertised as 54mm / 2-1/8" from a "Mini Shop" in England. Since I live so close to Yaesu, I think I'll drive over there after work Tuesday and see if they have them in stock.
73, Jim
On 07/04/2011 01:30 AM, Gary "Joe" Mayfield wrote:
Muffler clamps. There are some that fit perfectly and work great!
73, Joe kk0sd
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jim Jerzycke Sent: Sunday, July 03, 2011 2:20 PM To: [email protected] Subject: [amsat-bb] G-5400/5500 Cross-Boom U-Bolts
Greetings, all
I'm "improving" my elevation rotor setup, and I'm wondering what others are using to secure the cross-boom inside the elevation rotor.
I've been using stainless hose clamps, and they work kinda-sorta OK, but have a tendency to slip. I'd really like to get either some proper size u-bolts, or the part numbers from the clamps Yaesu supplies with the rotor.
They appear to be 54mm / 2-1/8" inside-the-legs, and I'm coming up blank on searching for some.
There are no part numbers for the clamps in the manuals I have for the rotors.
I have FOUR elevation rotors, and NO clamps!
Seems like the clamps always get lost when people take these apart to sell.
Thanks!
73, Jim KQ6EA _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
----- Original Message ----- From: "Jim Jerzycke" [email protected] To: [email protected] Sent: Sunday, July 03, 2011 9:19 PM Subject: [amsat-bb] G-5400/5500 Cross-Boom U-Bolts
Greetings, all
There are no part numbers for the clamps in the manuals I have for the rotors.
73, Jim KQ6EA
Hi Jim, KQ6EA
The U bolts is Part Number 56 The clamps are Part number 57 The plane washer is Part Number 58 The lock washer is Part number 59 The bolt in part number 60
The above Part Number and location comes from the manual of Major Part List for the old KR-500 Elevation Rotator from Ken Pro wich mechanically are the same size for the G5400 and G5500 Cross Boom U-Bolts
73" de
i8CVS Domenico
participants (3)
-
Gary "Joe" Mayfield -
i8cvs -
Jim Jerzycke