Thanks to all who answered my (incomplete) email.
It is clear to me now that my Kenpro 5400-A, which has an external control on the back, can be made to work with the LVB tracker.
After the 2 feet of snow melts, I will be refurbishing the rotator where needed. I am hoping this and the antenna deployment coincides with the arrival of my U/V full duplex 60w on both bands, transverter block arrives from Flex and I get back on satellites again.
73's to all and thanks again for the answers. Bob N4HY
n4hy expunged (n4hy@flex-radio.com):
After the 2 feet of snow melts, I will be refurbishing the rotator where needed. I am hoping this and the antenna deployment coincides with the arrival of my U/V full duplex 60w on both bands, transverter block arrives from Flex and I get back on satellites again.
I'm saving my pennies for the same setup, but to get my Sat antennas back up I need to trench some conduit across the back yard. Hard to do when the ground is frozen solid :)
-Steve
N1JFU - http://n1jfu.blogspot.com - smeuse@twitter
participants (2)
-
n4hy -
Steve Meuse