Hello to the list,
At present I hve a G-5500 AZEL Rotor, with the azimuth rotor on a rotor plate, and the elevation rotor about 5 ft above the flat top tower. An M2 fiberglass cross boom goes out 5 ft either side of the elevation rotor. There is a M2 7 ELE cp antenna on one side, and both a 432, 15 ELE CP antenna and a 35 ele 1296 antenna on the other side.
Several questions.
1 - everything VHF and UHF are RH CP. 1296 is fixed horizontal. How much would I benefit adding polarity reversing switches? and is there any benefit trying cp on 1296?
2 - I am thinking about adding 2.4G to this mess. What antenna would this group recommend for out in the country - near Gatesville Texas - pop 15,000 (1/2 of whom are incarcerated). Yagi, parabola, etc - weight would be a factor with the elevation rotor, and fiberglass boom. Downconverter or transverter tower mounted, and IF back to the shack.
3 - Are plans for 2.4 down only or are there also plans for 2.4 up? ie, downconverter or transverter?
I know these questions are very elementary, but I am new to AMSAT and learning.
Thanks for your patience,
Steve NU5D
Ham Radio Spoken Here...NU5D EM11
participants (1)
-
Steven Samuel Bosshard (NU5D)