Hi All. I'm hoping somebody may be able to advise me of an alternative "Windows" packet program that I can use on my laptop "with my BayCom modem" that doesn't use the AGW packet engine.
My old 266 MHz Dell Latitude doesn't want to know about AGWPE. :-( I use UISS and AGWPE on my other machine an I think that software is great.
Regards Mark VK3MJ Geelong, Australia.
----------------------------------------------------------------- Hello Ciaran,
You can use AGWpe as the soundcard modem. This site has an excellent "How-To": http://kc2rlm.info/soundcardpacket/
There is another application that works with AGWpe to simplify APRS via ISS and that is UISS. http://users.belgacom.net/hamradio/uiss.htm
At 07:51 PM 11/6/2008, Mark wrote:
Hi All. I'm hoping somebody may be able to advise me of an alternative "Windows" packet program that I can use on my laptop "with my BayCom modem" that doesn't use the AGW packet engine.
My old 266 MHz Dell Latitude doesn't want to know about AGWPE. :-( I use UISS and AGWPE on my other machine an I think that software is great.
Regards Mark VK3MJ Geelong, Australia.
Hi Mark,
Look at this page: http://www.tigertronics.com/bay_soft.htm#WinAPRS
The standard DOS BayCom software will also run under Windows if you run it in full screen mode.
73, Tony AA2TX
Hi Mark,
Do a Google search for WinTNC, version 1.1 or thereabouts. Nice piece of Shareware. I used it for a while with my Baycom-clone TNC, until I got a "real" one and moved (ran, screaming) to Linux. I forget which computer it was on, but your Dell should work just fine.
Good luck,
Greg KO6TH
From: translunar@bigpond.com To: AMSAT-BB@amsat.org Date: Fri, 7 Nov 2008 11:51:07 +1100 Subject: [amsat-bb] Packet Software
Hi All. I'm hoping somebody may be able to advise me of an alternative "Windows" packet program that I can use on my laptop "with my BayCom modem" that doesn't use the AGW packet engine.
My old 266 MHz Dell Latitude doesn't want to know about AGWPE. :-( I use UISS and AGWPE on my other machine an I think that software is great.
Regards Mark VK3MJ Geelong, Australia.
Hello Ciaran,
You can use AGWpe as the soundcard modem. This site has an excellent "How-To": http://kc2rlm.info/soundcardpacket/
There is another application that works with AGWpe to simplify APRS via ISS and that is UISS. http://users.belgacom.net/hamradio/uiss.htm
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
_________________________________________________________________ Stay up to date on your PC, the Web, and your mobile phone with Windows Live http://clk.atdmt.com/MRT/go/119462413/direct/01/
participants (3)
-
Anthony Monteiro -
Greg D. -
Mark