Yaesu FT-736R interface for HRD
Yaesu FT-736R interface for HRD
I finally finished a project to build an interface for the Yaesu FT736R so that it would work with Ham Radio Deluxe. It seems to be working well and i've sent it out to several testers and i haven't found any problems from the the interface. I had a pcb made and its available from batchpcb.com. It uses a PIC 18f14k50 microcontroller with a usb interface. The board has 3 pads on it which you wire to a 6 pin Din plug. All the code is open sourced via the GPL. You can see all the information for it at KA6BRB's website:
http://home.comcast.net/~tinkyr/736/N6BIL%20Hardware%20Emulator.htm
thanks, chuck n6bil
That's an amazing little box! "Well Done!" to all involved.
73, Jim KQ6EA
On 04/07/2011 06:53 PM, zdz eighty wrote:
Yaesu FT-736R interface for HRD
I finally finished a project to build an interface for the Yaesu FT736R so that it would work with Ham Radio Deluxe. It seems to be working well and i've sent it out to several testers and i haven't found any problems from the the interface. I had a pcb made and its available from batchpcb.com. It uses a PIC 18f14k50 microcontroller with a usb interface. The board has 3 pads on it which you wire to a 6 pin Din plug. All the code is open sourced via the GPL. You can see all the information for it at KA6BRB's website:
http://home.comcast.net/~tinkyr/736/N6BIL%20Hardware%20Emulator.htm
thanks, chuck n6bil _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
At 04:53 AM 4/8/2011, zdz eighty wrote:
Yaesu FT-736R interface for HRD
I finally finished a project to build an interface for the Yaesu FT736R so that it would work with Ham Radio Deluxe. It seems to be working well and i've sent it out to several testers and i haven't found any problems from the the interface. I had a pcb made and its available from batchpcb.com. It
I have been testing this interface. So far, I haven't been able to fault it. The FT-736 with the interface seems to work as well (within the limitations of the radio itself) as my IC-7000 on HRD.
73 de VK3JED / VK3IRL http://vkradio.com
Thank you again. The interface it's a great project working great with my Yaesu FT-736.
73 Riri OD5RI
On Thu, Apr 7, 2011 at 11:43 PM, Tony Langdon vk3jed@gmail.com wrote:
At 04:53 AM 4/8/2011, zdz eighty wrote:
Yaesu FT-736R interface for HRD
I finally finished a project to build an interface for the Yaesu FT736R so that it would work with Ham Radio Deluxe. It seems to be working well and i've sent it out to several testers and i haven't found any problems from the the interface. I had a pcb made and its available from batchpcb.com.
It
I have been testing this interface. So far, I haven't been able to fault it. The FT-736 with the interface seems to work as well (within the limitations of the radio itself) as my IC-7000 on HRD.
73 de VK3JED / VK3IRL http://vkradio.com
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (4)
-
Jim Jerzycke -
Riri Azrak OD5RI -
Tony Langdon -
zdz eighty