Hello,
I'm having problems with my LVB tracker project. After successful programing on the pic (16F876A), I'm not getting any response via Hyperterminal and there is no text on the LCD display. I have HDR1 jumper in run and HDR2 in off .
Can some one help me troubleshoot or provide any tips ?
Thank you, Yanko NX9G
Hello, I don't know if it could help, anyway, I had problems until I directy programmed the pic in circuit, following the instructions on the web site. (I used a prototype board, not the official PCB).
73, Steve
________________________________ Da: Yanko P. Yankov samy_b1@shell4you.net A: amsat-bb@amsat.org Inviato: Giovedì 10 Novembre 2011 19:51 Oggetto: [amsat-bb] LVB tracker
Hello,
I'm having problems with my LVB tracker project. After successful programing on the pic (16F876A), I'm not getting any response via Hyperterminal and there is no text on the LCD display. I have HDR1 jumper in run and HDR2 in off .
Can some one help me troubleshoot or provide any tips ?
Thank you, Yanko NX9G _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (2)
-
Stefano Simonetti
-
Yanko P. Yankov