FalconSat-3 sig level to decode
12 Oct
2017
12 Oct
'17
11:12 a.m.
On this morning's FalconSat-3 pass, I checked the signal required to decode using Dire Wolf. It was 18 dB SNR, so that's roughly S3 +/- above the noise floor.
RX setup: AirSpy SDR, SDRsharp, mast-mounted preamp, 15 X 15 X Yagi, G5500.
73, Ken, W7KKE
2611
Age (days ago)
2611
Last active (days ago)
0 comments
1 participants
participants (1)
-
Ken Swaggart