simple sat look down software
Anyone have luck using Simple Sat Look Down software? Ive been trying to install it to take a look at the program and I'm not having luck getting it to play nice. and I'm not finding any kind of email of the programmer for assistance.
http://www.tomdoyle.org/SimpleSatLookDown/SimpleSatLookDown.html
Todd Bloomingdale- KC9LOX Tomah, WI
Since the up link is at -10Khz( a lot of twisting of the XIT control, can the buttons on SATPAC program compensate. Seems like + and - on the buttons change both up link and down link. Using TS 2000.
Thanks
R W4BUE
Rich
If you use the Uplink calibration buttons on the SATPC32 CAT menu, only the uplink frequency changes .
Dave W0DHB
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Rich/wa4bue Sent: Thursday, February 13, 2014 7:55 PM To: [email protected] Subject: [amsat-bb] AO 73
Since the up link is at -10Khz( a lot of twisting of the XIT control, can the buttons on SATPAC program compensate. Seems like + and - on the buttons change both up link and down link. Using TS 2000.
Thanks
R W4BUE
_______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
When using SatPC32, you can change the uplink with the keyboard. CTRL + and - if I am correct. (Take a look at the manual) The buttons in the screen are only for download.
73 Jan PE0SAT
On 14-02-2014 04:15, David W0DHB wrote:
Rich
If you use the Uplink calibration buttons on the SATPC32 CAT menu, only the uplink frequency changes .
Dave W0DHB
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Rich/wa4bue Sent: Thursday, February 13, 2014 7:55 PM To: [email protected] Subject: [amsat-bb] AO 73
Since the up link is at -10Khz( a lot of twisting of the XIT control, can the buttons on SATPAC program compensate. Seems like + and - on the buttons change both up link and down link. Using TS 2000.
Thanks
R W4BUE
Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Hi All,
Today we started the Dash Borad set up.
TS 2000 Signal Link USB HP lap top computer with Windows 7
Note with rotor control, CAT for TS 2000, Remote Mouse, and Signal Link all USB ports are used.
We playe with the SDR down load.
Is this going to work for down load of data from AO 73 or do we need something elese!
god Bless
R
participants (4)
-
David W0DHB -
PE0SAT | Amateur Radio -
Rich/wa4bue -
Todd Bloomingdale