Hello Jim,

You can try my PstRotator program  http://www.qsl.net/yo3dmu/index_Page346.htm%C2%A0.It can be used like a standalone satellites tracking program, or like an interface between a satellites tracking program (SatPC32, Nova for Windows, Orbitron, HRD Satellite, Sat Explorer, WinOrbit, WXtrack, GPredict, HalloSat, SDR-RADIO) and your rotor controllers.The program supports separate rotor controllers for azimuth and elevation (in any combination), and also a single controller for both azimuth & elevation.The M2 RC2800PX (AZ / EL) rotor control boxes are supported, of course.

Codrut - YO3DMU

From: Jim White jim@coloradosatellite.com To: AMSAT-BB amsat-bb@amsat.org Sent: Saturday, September 5, 2015 2:53 AM Subject: [amsat-bb] Driver for M2 rotors

Does anyone know of a program, or a rotor driver for a tracking program, that works with the M2 RX2800PX rotor control boxes?  They use a serial interface.  It works something like this The computer sends "A<CR>" and the rotor control box sends back the current azimuth Computer sends "E<CR>" and rotor sends back current elevation Computer sends "A68.4<CR>" and the rotor goes to azimuth 68.4

etc.

Any ideas on a tracker that talks that language?

Jim _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb