Erich:

Will take a look at this and see what happens. Also looking at this to manage the doppler shift with AO-16. Turning on AFC for the FM birds takes care of it with them.

Thanks, Ron

Erich Eichmann wrote:

Hello Ron, In menu "Setup", "Radio Setup" check the option "Satellite mode". In Menu "Setup", "Options" check the Activate-at-Start option "CAT control". In both menus save the changes. When you restart SatPC32 it should switch the IC-910H into satellite mode. With FO-29 the radio should transmit on the VHF band. With VO-52 or AO-7 it should transmit on UHF. Let me know if that doesn't work. 55 + 73s, Erich, DK1TB

----- Original Message ----- From: "Ronald Nutter" rnutter@networkref.com To: amsat-bb@amsat.org Sent: Tuesday, April 15, 2008 6:52 PM Subject: [amsat-bb] SatPC32 and ICOM 910H question

...

I am trying to learn how to use SatPC32 for Doppler correction on the SSB birds. I have run into a "brick wall" in terms of how it is operating that is giving me some fits.

When I put SatPC32 into CAT mode, the radio shifts into the appropriate frequencies but it wont transmit on the right band. When I press the M/S to swap the displays around so that it will transmit on the correct band, the radio stops adjusting to what is shown on the SatPC32 display.

Can someone point out what I am doing wrong or do I need to change to one or more of the config files in SatPC32 ?

Thanks, Ron KA4KYI _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb