I'm back up here in the frozen north for the holidays and today had some time to work on my G-5500's azimuth problem. I took my 5500 control box up here with me from my station in Florida to help test. Now I've got it down to the Azimuth rotor itself. I used to have a repair guide for this rotor, but I haven't worked on one in many years and 2 moves ago and can't find it anywhere including online. Does anyone have a copy they could email me? I have the cable disconnected from the rotor control box. I'm interested in taking some meter readings to try to determine what parts if any to order from Yaesu. Thanks in advance.
Everyone have a very Merry Christmas, happy holiday, and a HNY.
73 Jeff kb2m
What's not working? The gross troubleshooting is pretty simple. Fixing? Not so easy.
On Sat, Dec 24, 2016 at 10:30 AM, Jeff Griffin [email protected] wrote:
I'm back up here in the frozen north for the holidays and today had some time to work on my G-5500's azimuth problem. I took my 5500 control box up here with me from my station in Florida to help test. Now I've got it down to the Azimuth rotor itself. I used to have a repair guide for this rotor, but I haven't worked on one in many years and 2 moves ago and can't find it anywhere including online. Does anyone have a copy they could email me? I have the cable disconnected from the rotor control box. I'm interested in taking some meter readings to try to determine what parts if any to order from Yaesu. Thanks in advance.
Everyone have a very Merry Christmas, happy holiday, and a HNY.
73 Jeff kb2m
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Jeff,
The big question is, What is it doing or not doing ?
I had a similar problems with both the elevation and azimuth sections of one of my G5500's. The problems occurred about 3 years apart. The symptom was I could hear the motor but the rotor did not turn.
The cause was the setscrew that holds the "Bow Tie" cam to the motor shaft in the brake came loose.
If this describes your problem, I suggest you check the set screw. If not, keep it in mind for the future.
BOB KO6TZ
I'm back up here in the frozen north for the holidays and today had some time to work on my G-5500's azimuth problem. I took my 5500 control box up here with me from my station in Florida to help test. Now I've got it down to the Azimuth rotor itself. I used to have a repair guide for this rotor, but I haven't worked on one in many years and 2 moves ago and can't find it anywhere including online. Does anyone have a copy they could email me? I have the cable disconnected from the rotor control box. I'm interested in taking some meter readings to try to determine what parts if any to order from Yaesu. Thanks in advance.
Everyone have a very Merry Christmas, happy holiday, and a HNY.
73 Jeff kb2m
Jeff,
I failed to paste in the readings on the last post.
G-5500 rotor
E-4 DOWN #16 WHITE E-5 UP #16 BLACK E-6 COM #18 BLUE
E4 to e5 = 7.2 ohm E4 to E6 = 3.9 ohm E5 to E6 = 4.8 ohm
A4 to A5 = 9.7 ohm A4 TO A6 = 5.5 ohm A5 to A6 = 5.5ohm
A-4 LEFT #16 WHITE A-5 RIGHT #16 BLACK A-6 COM #18 BLUE
BOB KO6TZ
I'm back up here in the frozen north for the holidays and today had some time to work on my G-5500's azimuth problem. I took my 5500 control box up here with me from my station in Florida to help test. Now I've got it down to the Azimuth rotor itself. I used to have a repair guide for this rotor, but I haven't worked on one in many years and 2 moves ago and can't find it anywhere including online. Does anyone have a copy they could email me? I have the cable disconnected from the rotor control box. I'm interested in taking some meter readings to try to determine what parts if any to order from Yaesu. Thanks in advance.
Everyone have a very Merry Christmas, happy holiday, and a HNY.
73 Jeff kb2m
Thanks for all the info. I think I narrowed it down to a bad cable(or connector at the rotor) between the control box and the rotor. From the info gathered the rotor itself appears to not be the problem. I will get out there tomorrow and do a quick cable check, and will know for sure.
73 Jeff kb2m
-----Original Message----- From: AMSAT-BB [mailto:[email protected]] On Behalf Of KO6TZ Bob Sent: Saturday, December 24, 2016 12:43 PM To: [email protected] Subject: Re: [amsat-bb] bad G-5500 rotor
Jeff,
I failed to paste in the readings on the last post.
G-5500 rotor
E-4 DOWN #16 WHITE E-5 UP #16 BLACK E-6 COM #18 BLUE
E4 to e5 = 7.2 ohm E4 to E6 = 3.9 ohm E5 to E6 = 4.8 ohm
A4 to A5 = 9.7 ohm A4 TO A6 = 5.5 ohm A5 to A6 = 5.5ohm
A-4 LEFT #16 WHITE A-5 RIGHT #16 BLACK A-6 COM #18 BLUE
BOB KO6TZ
I'm back up here in the frozen north for the holidays and today had some time to work on my G-5500's azimuth problem. I took my 5500 control box up here with me from my station in Florida to help test. Now I've got it down to the Azimuth rotor itself. I used to have a repair guide for this rotor, but I haven't worked on one in many years and 2 moves ago and can't find it anywhere including online. Does anyone have a copy they could email me? I have the cable disconnected from the rotor control box. I'm interested in taking some meter readings to try to determine what parts if any to order from Yaesu. Thanks in advance.
Everyone have a very Merry Christmas, happy holiday, and a HNY.
73 Jeff kb2m _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Problem fixed. First thing I checked in October before I headed south for the winter was the rotor cable, and connection. All looked good. After checking the cable with input from other setups, it became apparent that I had a bad connection between the rotor and the control box. With that info in hand I climbed up to the rotor and swapped the az/el cables. Azimuth was then working ok, indicating a 100% probability of a az cable issue. I then inspected the cable more thoroughly and found , behind some bushes where I had about 30 foot of it coiled up it had been cut in two places with maybe a weed whacker. I think the gardeners helper cut it and then stashed it behind the bushes to hide the fact. Anyway all is once again well in kb2m/2 satellite land. All I need now is a 70cm pre amp for up here....
All have a Happy New Year 73 Jeff kb2m
-----Original Message----- From: AMSAT-BB [mailto:[email protected]] On Behalf Of Jeff Griffin Sent: Saturday, December 24, 2016 1:05 PM To: [email protected] Subject: Re: [amsat-bb] bad G-5500 rotor
Thanks for all the info. I think I narrowed it down to a bad cable(or connector at the rotor) between the control box and the rotor. From the info gathered the rotor itself appears to not be the problem. I will get out there tomorrow and do a quick cable check, and will know for sure.
73 Jeff kb2m
-----Original Message----- From: AMSAT-BB [mailto:[email protected]] On Behalf Of KO6TZ Bob Sent: Saturday, December 24, 2016 12:43 PM To: [email protected] Subject: Re: [amsat-bb] bad G-5500 rotor
Jeff,
I failed to paste in the readings on the last post.
G-5500 rotor
E-4 DOWN #16 WHITE E-5 UP #16 BLACK E-6 COM #18 BLUE
E4 to e5 = 7.2 ohm E4 to E6 = 3.9 ohm E5 to E6 = 4.8 ohm
A4 to A5 = 9.7 ohm A4 TO A6 = 5.5 ohm A5 to A6 = 5.5ohm
A-4 LEFT #16 WHITE A-5 RIGHT #16 BLACK A-6 COM #18 BLUE
BOB KO6TZ
I'm back up here in the frozen north for the holidays and today had some time to work on my G-5500's azimuth problem. I took my 5500 control box up here with me from my station in Florida to help test. Now I've got it down to the Azimuth rotor itself. I used to have a repair guide for this rotor, but I haven't worked on one in many years and 2 moves ago and can't find it anywhere including online. Does anyone have a copy they could email me? I have the cable disconnected from the rotor control box. I'm interested in taking some meter readings to try to determine what parts if any to order from Yaesu. Thanks in advance.
Everyone have a very Merry Christmas, happy holiday, and a HNY.
73 Jeff kb2m _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
_______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
participants (3)
-
Jeff Griffin -
KO6TZ Bob -
Norm n3ykf