Umesh, you are right. The program saves the screen position in file "SatPos.SQF", located  in the SatPC32 main data "SatPC32" folder (for configurations II ... IV in sub folders CfgII, CfgIII and CfgIV).  Line #1 contains the horizontal, line #2 the vertical screen position.

You can draw  the program window to the screen position you want.  The program saves the last position if you close it via menu File > Quit, but not if you close it via the X control.

73s, Erich, DK1TB

Am 18.06.2018 um 05:40 schrieb [email protected]:

In the file "SatPos.SQF" set first 2 lines to 100 and 100.  Worked for me. This file is usually in the C:\Users<username>\AppData\Roaming\SatPC32 folder.

73! Umesh K6VUG

---

Message: 4 Date: Sun, 17 Jun 2018 16:53:26 -0400 From: Thomas Schaefer [email protected] To: AMSAT BB [email protected] Subject: [amsat-bb] Reset SatPC32 window position Message-ID: [email protected] Content-Type: text/plain;    charset=us-ascii

Does anyone know where the saved window position is kept for SatPC32?

I ask as last time I used SatPC32, I had 2 monitors. SatPC32 was on the other monitor. It does not appear to detect that the system now has a single monitor and bring the window into the viewable area. When I run the program, it is starting on the second monitor and I need to reset its saved position.

Thanks,

Tom NY4I

---

---

Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb