ANDE-1 and File RAFT speak Sa Wad Dee Pa Ted Thai and Long Live the King
Hello PA3GUO , 9W2QC and All HAM
Could you please advice me step by step for command control to speak of ANDE. I will control RAFT and ANDE speak message of my send to command talk to satellites.
Best Regards,
Tanan Rangseeprom HS1JAN , XU7ADN
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
This is meaasge on Hyper Terminal link to TNC2
PacComm TINY-2 MARK-2 Packet Controller
(c) Copyright 1985-1994 PacComm
Technical Support - (813) 875-6417
AX.25 Level 2 Version 2.0 Features: KISS PERSONAL MESSAGE SYSTEM CLOCK CHIP SUPPORT Expanded NMEA 183 (GPS) SUPPORT
Release 3.2 April 15, 1994
cmd:c ande-1 *** ANDE-1 busy *** DISCONNECTED
HS1JAN>APRS,ANDE-1*::TALK : Long Live Majesty the King Bhumibol Adulyadej King of Thailand.
cmd:c ande-1 *** ANDE-1 busy *** DISCONNECTED cmd:c ande-1 *** ANDE-1 busy *** DISCONNECTED
PacComm TINY-2 MARK-2 Packet Controller
(c) Copyright 1985-1994 PacComm
Technical Support - (813) 875-6417
AX.25 Level 2 Version 2.0 Features: KISS PERSONAL MESSAGE SYSTEM CLOCK CHIP SUPPORT Expanded NMEA 183 (GPS) SUPPORT
Release 3.2 April 15, 1994
cmd:c raft *** retry count exceeded *** DISCONNECTED cmd:c raft *** CONNECTED to RAFT cmd:k :talk : Sa wad dee pa ted thai :talk : long live the king :talk : Long live the king bhumibol HS1A :Talk : CQ CQ DE HS1JAN *** retry count exceeded *** DISCONNECTED
____________________________________________________________________________________ Need a quick answer? Get one in minutes from people who know. Ask your question on www.Answers.yahoo.com
Could you please advice me step by step for command control to speak of ANDE. I will control RAFT and ANDE speak message of my send to command talk... Tanan Rangseeprom HS1JAN , XU7ADN
See: http://www.ew.usna.edu/~bruninga/ande/ANDEcontract.txt
This is meaasge on Hyper Terminal link to TNC2 cmd:c ande-1 *** ANDE-1 busy *** DISCONNECTED
You cannot connect to ANDE. It does nothing for users. It must be a command station. But you can DIGIPEAT via ANDE-1 or VIA ARISS callsigns on ANDE
HS1JAN>APRS,ANDE-1*::TALK : Long Live Majesty the
Yes, that is correct, but first a SYSOP has to command ANDE VOICE on first for every orbit.. I do not think there are any command stations in your area.
cmd:c raft *** CONNECTED to RAFT cmd:k :talk : Sa wad dee pa ted thai :talk : long live the king :talk : Long live the king bhumibol HS1A :Talk : CQ CQ DE HS1JAN
Once you connect to RAFT, then QSY to another frequency and DISCONNECT. This is so that RAFT does not hear you disconnect. Hit "cmd: D" two times to force a disconnect from your TNC. NEXT then QSY back to 145.825 and send your TALK messages. They will work then.
The CONNECT RAFT only turns on the CONNECTED LED and that is what turns on the Voice Module. But you have to be UNCONNECTED to send the TALK message. But if RAFT sees the disconnect, then it will turn off the voice ...
Hope that helps! Bob, WB4APR
Once you connect to RAFT, then QSY to another frequency and DISCONNECT. This is so that RAFT does not hear you disconnect. Hit "cmd: D" two times to force a disconnect from your TNC. NEXT then QSY back to 145.825 and send your TALK messages. They will work then.
The CONNECT RAFT only turns on the CONNECTED LED and that is what turns on the Voice Module. But you have to be UNCONNECTED to send the TALK message. But if RAFT sees the disconnect, then it will turn off the voice ...
Hope that helps! Bob, WB4APR
*** CONNECTED to RAFT Speak "Welcome to RAFT" ????
Change frequency
cmd:d cmd:d *** retry count exceeded
*** DISCONNECTED
Back to 145.825 MHz
cmd:k RAFT>BEACON,SGATE:T#020,079,002,057,056,104,10000000,999
:talk :hs0nnu 59 73 >>> No Speak but have packet
RAFT>APRS1,SGATE::TALK :Activate my voice by connecting "raft".
HS0NNU>APRS,ARISS::TALK :HELLO TA NONE HS1JAN SIGNAL 59 >>> No Speak but have packet
:talk :hs2waq 59 73 >>> No Speak but have packet
RAFT>BEACON,SGATE:T#022,079,002,057,056,103,10000000,999
HS0NNU>APRS,ARISS::TALK :HELLO TA NONE HS1JAN SIGNAL 59 >>> No Speak and not paket
RAFT>APRS2,SGATE::TALK :I will SPEAK any message you send to talk
:talk : hs0nnu 59 >>> No Speak and not packet
RAFT>BEACON,SGATE:T#023,079,002,057,056,103,10000000,999
HS0NNU>APRS,ARISS:=1349.23N/10034.13E-73' Via Satellite {UISS50}
PLEASE ADVICE ME
Tanan Rangseeprom , HS1JAN
____________________________________________________________________________________ Finding fabulous fares is fun. Let Yahoo! FareChase search your favorite travel sites to find flight and hotel bargains. http://farechase.yahoo.com/promo-generic-14795097
Once you connect to RAFT, then QSY to another frequency and DISCONNECT. This is so that RAFT does not hear you disconnect. Hit "cmd: D" two times to force a disconnect from your TNC. NEXT then QSY back to 145.825 and send your TALK messages. They will work then.
The CONNECT RAFT only turns on the CONNECTED LED and that is what turns on the Voice Module. But you have to be UNCONNECTED to send the TALK message. But if RAFT sees the disconnect, then it will turn off the voice ...
*** CONNECTED to RAFT It Speaks "Welcome to TEXT SPEAK"
Change frequency
cmd:d cmd:d *** retry count exceeded *** DISCONNECTED
Back to 145.825 MHz
cmd:k
:talk :hs0nnu 59 73
No Speak but have packet
*** TALK has to be in uppercase I think...
HS0NNU>APRS,ARISS::TALK :HELLO TA NONE HS1JAN SIGNAL 59
No Speak but have packet
But it was not digipeated by RAFT so, it was not heard by RAFT. If it was digipeated by RAFT then you would know that RAFT decoded it and you would see the packet as:
HS0NNU>APRS,RAFT*::TALK :HELLO TA NONE HS1JAN
There can be up to a 10 second delay between the time the packet is digipeated and before it is spoken.
:talk :hs2waq 59 73 >>> No Speak but have packet
HS0NNU>APRS,ARISS::TALK :HELLO TA NONE HS1JAN SIGNAL 59
No Speak and not packet
:talk : hs0nnu 59 >>> No Speak and not packet
HS0NNU>APRS,ARISS:=1349.23N/10034.13E-73' Via Satellite {UISS50}
PLEASE ADVICE ME
None of the packets above appear to be digipeated by RAFT*, so it means it did not hear it. I am using 100W into 10 dB gain antenna, and can only hit RAFT when it is above 20 degrees. It seems to be
participants (2)
-
Robert Bruninga -
Tanan Rangseeprom