Hello
I am working on getting FoxTelem working
I am able to decode packets from recordings in the manual http://amsat.us/FoxTelem/recordings/
I am not able to decode packets from recording at https://www.amsat.org/ao-92-commissioned-open-for-amateur-use/
I am not able to decode packets from my SDRconsole V3
Any help guidance would be appreciated
I think my first step is, should i be able to decode packets from the commissioning recording?
Thanks in advance
Sean Fay AA0AN
Another person had a similar problem with SDRConsole pretty recently. Nearly always with troubles decoding audio there is a high pass filter somewhere that blocks the really low frequency audio (below 200Hz) that carries the data. In the case of SDRConsole, as I recall there was a checkbox in some non-obvious place. You might try looking back in the archived of this BB for the last couple of months.
I just listened to the commissioning audio. I can hear the telemetry but not very strongly. It seems logical that since this is really meant for audio, not telemetry, that it was probably recorded in such a way that you would not get the telemetry. (For example you are very unlikely to get telemetry recording off the headphone jack of your radio).
Good luck and 73,
Burns WB1FJ
On Tue, Oct 30, 2018 at 4:31 PM sean fay spatrickfay@gmail.com wrote:
Hello
I am working on getting FoxTelem working
I am able to decode packets from recordings in the manual http://amsat.us/FoxTelem/recordings/
I am not able to decode packets from recording at https://www.amsat.org/ao-92-commissioned-open-for-amateur-use/
I am not able to decode packets from my SDRconsole V3
Any help guidance would be appreciated
I think my first step is, should i be able to decode packets from the commissioning recording?
Thanks in advance
Sean Fay AA0AN _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
It was actually earlier this month. Here was the conclusion (not too detailed, but you can ask the person who solved it):
On Fri, Oct 5, 2018 at 6:26 PM, Albert van Deursen avdeur@home.nl wrote:
HI Burns,
Sorry late reply but quite busy lately.. Think after just reading Hasan’s AMSAT Mailbox mail the solution in V3 has been found. (checked boxes equalizer etc)
I did uncheck these boxes earlier (by coincidence I guess) and that must have been the reason why I started again to receive frames.
Thanks yr contribution on solving this issue. 73 Albert PD0OXW
On Tue, Oct 30, 2018 at 11:02 PM Burns Fisher burns@fisher.cc wrote:
Another person had a similar problem with SDRConsole pretty recently. Nearly always with troubles decoding audio there is a high pass filter somewhere that blocks the really low frequency audio (below 200Hz) that carries the data. In the case of SDRConsole, as I recall there was a checkbox in some non-obvious place. You might try looking back in the archived of this BB for the last couple of months.
I just listened to the commissioning audio. I can hear the telemetry but not very strongly. It seems logical that since this is really meant for audio, not telemetry, that it was probably recorded in such a way that you would not get the telemetry. (For example you are very unlikely to get telemetry recording off the headphone jack of your radio).
Good luck and 73,
Burns WB1FJ
On Tue, Oct 30, 2018 at 4:31 PM sean fay spatrickfay@gmail.com wrote:
Hello
I am working on getting FoxTelem working
I am able to decode packets from recordings in the manual http://amsat.us/FoxTelem/recordings/
I am not able to decode packets from recording at https://www.amsat.org/ao-92-commissioned-open-for-amateur-use/
I am not able to decode packets from my SDRconsole V3
Any help guidance would be appreciated
I think my first step is, should i be able to decode packets from the commissioning recording?
Thanks in advance
Sean Fay AA0AN _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
participants (2)
-
Burns Fisher
-
sean fay