Hi Howard,

I think the answer is "yes" you can do what you want to do. SatPC32 12.8a is really good with 2 radios. I've had it running a TS-2000x and an IC-910H at the same time, in both directions, meaning one radio xmit, the other receive--and flip flopped from that, too. It works! Oh, I tried the IC-910H with a FT-817, too. Worked fine.

What 2 radios are you trying to configure, and which one do you want to Xmit and which one receive?

The configuration is under the Radio setup window. You need to setup both radios. Try one radio as Radio 1, then the other as Radio 2. If you have the xmit/receive setup backwards, just set them up the other way.

73,

Mark N8MH

--------- Follow up to my last post So really what I want to do is to make 2 tranceiver,to act like a FT847,FT736,IC910,etc. Thanks again Howard VE4ISP

----- Original Message ----- From: "Howard Kowall" hkowall@shaw.ca To: "AMSAT-BB@amsat.org" amsat-bb@amsat.org Sent: Tuesday, November 17, 2009 3:06 PM Subject: [amsat-bb] SatPC32 Auto Doppler

Hello to everyone Is it possible to use SatPC32 12.8a without auto Doppler correction? I use 2 separate transceiver one for uplink the other for downlink,all I want to do is be able to change the downlink freq. and let the uplink follow according to the Doppler sqf file.I want no automatic Doppler correction just transparent tuning. Thanks to all who read this Howard VE4ISP