I threw this out there on the eham satellite forum looking for answers but I'll try here too. I'm looking for some fairly simple plans for this antenna. Everything I find either seems to be intended for WiFi or if it is ham related is full of mathematical formulas to figure length, diameter, spacing etc. Math was never my strong suit so I'd prefer to find something with the actual already computed dimensions clearly stated. Preferably in English rather than metric measurements. I found an article in the May/June 2008 AMSAT Journal that looked promising but there are no hard numbers, just the formulas and I don't have a calculator capable of some of the computations, much less being able to work them out in my head. Been a long time since I was in school!.. hi hi... I have a downconverter I'm not sure even works and I don't want to spend a huge amount of time and trouble to be able to test it. Tnx and 73, Michael, W4HIJ
One I've used several times...
http://www.wireless.org.au/~jhecker/stuff/Helix.php from
http://www.wireless.org.au/~jhecker/ and his standalone program
http://www.wireless.org.au/~jhecker/helix/ HelixCalc.exe to calc and print the form for winding the helix.
It works... Did it my self and still using it... below
http://picasaweb.google.com/ve4yz.alan/24Ghz#5241092279489872194
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Michael Tondee Sent: October 30, 2009 11:03 PM To: Amsat BB Subject: [amsat-bb] Simple 2.4Ghz helix plans?
I threw this out there on the eham satellite forum looking for answers but I'll try here too. I'm looking for some fairly simple plans for this antenna. Everything I find either seems to be intended for WiFi or if it is ham related is full of mathematical formulas to figure length, diameter, spacing etc. Math was never my strong suit so I'd prefer to find something with the actual already computed dimensions clearly stated. Preferably in English rather than metric measurements. I found an article in the May/June 2008 AMSAT Journal that looked promising but there are no hard numbers, just the formulas and I don't have a calculator capable of some of the computations, much less being able to work them out in my head. Been a long time since I was in school!.. hi hi... I have a downconverter I'm not sure even works and I don't want to spend a huge amount of time and trouble to be able to test it. Tnx and 73, Michael, W4HIJ _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
On 31 Oct 2009 at 0:03, Michael Tondee wrote:
Date sent: Sat, 31 Oct 2009 00:03:02 -0400 From: Michael Tondee [email protected] Subject: [amsat-bb] Simple 2.4Ghz helix plans? To: Amsat BB [email protected]
I threw this out there on the eham satellite forum looking for answers but I'll try here too. I'm looking for some fairly simple plans for this antenna. Everything I find either seems to be intended for WiFi or if it is ham related is full of mathematical formulas to figure length, diameter, spacing etc. Math was never my strong suit so I'd prefer to find something with the actual already computed dimensions clearly stated. Preferably in English rather than metric measurements. I found an article in the May/June 2008 AMSAT Journal that looked promising but there are no hard numbers, just the formulas and I don't have a calculator capable of some of the computations, much less being able to work them out in my head. Been a long time since I was in school!.. hi hi... I have a downconverter I'm not sure even works and I don't want to spend a huge amount of time and trouble to be able to test it. Tnx and 73, Michael, W4HIJ
Here is another variation on the same subject. Even if some maths are present they are not too much out of range for the non maths incline. What i like is there is no need for a circular reflector as they used a square sheet of metal for the reflector.
But here is some cheap and very effective antennas at 20$ it is a deal if you just look at the cost and time spent on building an helix plus if you want to received something in the other circular polarisation you will not have this huge attenuation near 60 db's only 3 db's and don't forget AO-51 2.4GHZ is linear polarized not circular.
http://cgi.ebay.com/16-dBi-2-4-GHz-802-11b-g-Wifi-Yagi- Antenna_W0QQitemZ170388251288QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item27abee6298
Another one with a N type connector even cheaper with free shipping...I just ordered one...
http://cgi.ebay.com/New-2-4GHz-Directional-Antenna-18Dbi-for-Wifi- Wireless_W0QQitemZ190333956933QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item2c50c9b345
http://cgi.ebay.com/16-dBi-2-4-GHz-802-11b-g-Wifi-Yagi-Antenna-N- F_W0QQitemZ280408804827QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item4149aacddb
"-"
Luc Leblanc VE2DWE Skype VE2DWE www.qsl.net/ve2dwe DSTAR urcall VE2DWE WAC BASIC CW PHONE SATELLITE
Hi Michael,
I followed instructions from Howard Long, G6LVB, posted here a few years ago. (If the archives go back far enough, it was in November of 2001). I don't have it electronically, but the instructions went something like this:
Get a long piece of thick bare copper wire (#10 is what I think I used), and put a small mark on it every 5 3/4 inches (146mm). Sharpie marker works well. Wrap it around a cardboard tube that's about 1 3/4 inches in diameter. The tube from a roll of paper towels works fine; the dimension is not critical. Space the turns about 1 1/4 inches (32mm) apart.
Now, here's the magic part: once you get the helix about right, sight down one edge, and you'll see those 146mm marks you made in the first step. Twist and stretch the coils so that they all line up, AND at the same time, keep the turns spaced (center to center) 32mm apart. Take your time. The diameter of the turns will take care of itself.
For the first 1/4 turn (the matching section), decrease the pitch so that it gently slopes away from the reflector, which needs to be something around 4 or so inches in diameter. The rest of the mechanical stuff you can pretty much make up yourself. There are a lot of examples if you browse around the web a bit.
Helix antennas are pretty forgiving in construction, and really cheap to make.
Greg KO6TH
p.s. If you already have a Wi-Fi antenna, it should work too. Conversely, I've found that a Helix easily outperforms those "Pringles can" Wi-Fi antennas that were popular a few years ago, in a Wi-Fi application.
Date: Sat, 31 Oct 2009 00:03:02 -0400 From: [email protected] To: [email protected] Subject: [amsat-bb] Simple 2.4Ghz helix plans?
I threw this out there on the eham satellite forum looking for answers but I'll try here too. I'm looking for some fairly simple plans for this antenna. Everything I find either seems to be intended for WiFi or if it is ham related is full of mathematical formulas to figure length, diameter, spacing etc. Math was never my strong suit so I'd prefer to find something with the actual already computed dimensions clearly stated. Preferably in English rather than metric measurements. I found an article in the May/June 2008 AMSAT Journal that looked promising but there are no hard numbers, just the formulas and I don't have a calculator capable of some of the computations, much less being able to work them out in my head. Been a long time since I was in school!.. hi hi... I have a downconverter I'm not sure even works and I don't want to spend a huge amount of time and trouble to be able to test it. Tnx and 73, Michael, W4HIJ _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
_________________________________________________________________ Windows 7: Simplify your PC. Learn more. http://www.microsoft.com/Windows/windows-7/default.aspx?ocid=PID24727::T:WLM...
You know this amsat-bb needs to collect up all the info and make a forum web page
Same old info over and over
----- Original Message ----- From: "Greg D." [email protected] To: [email protected]; [email protected] Sent: Saturday, October 31, 2009 5:15 PM Subject: [amsat-bb] Re: Simple 2.4Ghz helix plans?
Hi Michael,
I followed instructions from Howard Long, G6LVB, posted here a few years ago. (If the archives go back far enough, it was in November of 2001). I don't have it electronically, but the instructions went something like this:
Get a long piece of thick bare copper wire (#10 is what I think I used), and put a small mark on it every 5 3/4 inches (146mm). Sharpie marker works well. Wrap it around a cardboard tube that's about 1 3/4 inches in diameter. The tube from a roll of paper towels works fine; the dimension is not critical. Space the turns about 1 1/4 inches (32mm) apart.
Now, here's the magic part: once you get the helix about right, sight down one edge, and you'll see those 146mm marks you made in the first step. Twist and stretch the coils so that they all line up, AND at the same time, keep the turns spaced (center to center) 32mm apart. Take your time. The diameter of the turns will take care of itself.
For the first 1/4 turn (the matching section), decrease the pitch so that it gently slopes away from the reflector, which needs to be something around 4 or so inches in diameter. The rest of the mechanical stuff you can pretty much make up yourself. There are a lot of examples if you browse around the web a bit.
Helix antennas are pretty forgiving in construction, and really cheap to make.
Greg KO6TH
p.s. If you already have a Wi-Fi antenna, it should work too. Conversely, I've found that a Helix easily outperforms those "Pringles can" Wi-Fi antennas that were popular a few years ago, in a Wi-Fi application.
Date: Sat, 31 Oct 2009 00:03:02 -0400 From: [email protected] To: [email protected] Subject: [amsat-bb] Simple 2.4Ghz helix plans?
I threw this out there on the eham satellite forum looking for answers but I'll try here too. I'm looking for some fairly simple plans for this antenna. Everything I find either seems to be intended for WiFi or if it is ham related is full of mathematical formulas to figure length, diameter, spacing etc. Math was never my strong suit so I'd prefer to find something with the actual already computed dimensions clearly stated. Preferably in English rather than metric measurements. I found an article in the May/June 2008 AMSAT Journal that looked promising but there are no hard numbers, just the formulas and I don't have a calculator capable of some of the computations, much less being able to work them out in my head. Been a long time since I was in school!.. hi hi... I have a downconverter I'm not sure even works and I don't want to spend a huge amount of time and trouble to be able to test it. Tnx and 73, Michael, W4HIJ _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Windows 7: Simplify your PC. Learn more. http://www.microsoft.com/Windows/windows-7/default.aspx?ocid=PID24727::T:WLM... _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
--------------------------------------------------------------------------------
No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.423 / Virus Database: 270.14.39/2470 - Release Date: 10/30/09 15:18:00
This was the idea of the Wiki, which seemed to be a victim of infant mortality.
-- Ben Jackson - [email protected] - www.innismir.net Sent from my Mobile Device Andrew Rich wrote:
You know this amsat-bb needs to collect up all the info and make a forum web
page
Same old info over and over
----- Original Message -----
From: "Greg D." <[email protected]>
To: <[email protected]>; <[email protected]>
Sent: Saturday, October 31, 2009 5:15 PM
Subject: [amsat-bb] Re: Simple 2.4Ghz helix plans?
Hi Michael,
I followed instructions from Howard Long, G6LVB, posted here a few
years ago. (If the archives go back far enough, it was in November of
2001). I don't have it electronically, but the instructions went
something like this:
Get a long piece of thick bare copper wire (#10 is what I think I used),
and
put a small mark on it every 5 3/4 inches (146mm). Sharpie marker works
well. Wrap it around a
cardboard tube that's about 1 3/4 inches in diameter. The tube from a
roll of paper towels works fine; the dimension is not critical. Space the
turns about 1 1/4 inches (32mm) apart.
Now, here's the magic part: once you get the helix about right, sight
down one edge, and you'll see those 146mm marks you made in the first
step. Twist and stretch the coils so that they all line up, AND at the
same time, keep the turns spaced (center to center) 32mm apart. Take your
time. The diameter of the turns will take care of itself.
For the first 1/4 turn (the matching section), decrease the pitch so that
it gently slopes away from the reflector, which needs to be something
around 4 or so inches in diameter. The rest of the mechanical stuff you
can pretty much make up yourself. There are a lot of examples if you
browse around the web a bit.
Helix antennas are pretty forgiving in construction, and really cheap to
make.
Greg KO6TH
p.s. If you already have a Wi-Fi antenna, it should work too.
Conversely, I've found that a Helix easily outperforms those "Pringles
can" Wi-Fi antennas that were popular a few years ago, in a Wi-Fi
application.
Date: Sat, 31 Oct 2009 00:03:02 -0400
From: [email protected]
Subject: [amsat-bb] Simple 2.4Ghz helix plans?
I threw this out there on the eham satellite forum looking for answers
but I'll try here too.
I'm looking for some fairly simple plans for this antenna. Everything I
find either seems to be intended for WiFi or if it is ham related is
full of mathematical formulas to figure length, diameter, spacing etc.
Math was never my strong suit so I'd prefer to find something with the
actual already computed dimensions clearly stated. Preferably in English
rather than metric measurements. I found an article in the May/June 2008
AMSAT Journal that looked promising but there are no hard numbers, just
the formulas and I don't have a calculator capable of some of the
computations, much less being able to work them out in my head. Been a
long time since I was in school!.. hi hi... I have a downconverter I'm
not sure even works and I don't want to spend a huge amount of time and
trouble to be able to test it.
Tnx and 73,
Michael, W4HIJ
Sent via [email protected]. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Windows 7: Simplify your PC. Learn more.
http://www.microsoft.com/Windows/windows-7/default.aspx?ocid=PID24727::T:WLM...
Sent via [email protected]. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.423 / Virus Database: 270.14.39/2470 - Release Date: 10/30/09
15:18:00
_______________________________________________
Sent via [email protected]. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
I'll come back to my recommendation of the standalone HelixCalc.exe by Jason Hecker or his web app
Web http://www.wireless.org.au/~jhecker/stuff/Helix.php
Standalone http://www.wireless.org.au/~jhecker/helix/HelixCalc.zip
Why?
Most other web apps allow for 2 inputs - frequency and number of turns. You then have to do a lot of measuring on a tube of a diameter dictated to you to wind with the correct pitch and allow for the coil to spring open to a larger diameter.
The Hecker program allows for multiple inputs and most important for the DIYer IHMO is the tube diameter you plan to use. PVC pipe, conduit, mailing tube, dowel or whatever - you use what you have or what you can find at Home Depot close to you initial calculations. You can also play with diameter, # of windings etc to see how they effect the theoretical gain.
Print out the form, wrap and tape it on your tube and then wrap the wire along the printed lines. No calculations and minimal measuring. After testing your first wire wrap and measuring the amount that the coil springs open you can enter that new diameter in the calculator. i.e. a 2" O.D. PVC pipe will not give you a 2" I.D helix - it will be slightly larger as the coil springs open unless you use standoffs on each loop a la W7LDR helix construction.
As to the comments on the Wiki... Until it happens... Google! The AMSAT BB archives are searchable.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Michael Tondee Sent: October 30, 2009 11:03 PM To: Amsat BB Subject: [amsat-bb] Simple 2.4Ghz helix plans?
I threw this out there on the eham satellite forum looking for answers but I'll try here too. I'm looking for some fairly simple plans for this antenna. Everything I find either seems to be intended for WiFi or if it is ham related is full of mathematical formulas to figure length, diameter, spacing etc. Math was never my strong suit so I'd prefer to find something with the actual already computed dimensions clearly stated. Preferably in English rather than metric measurements. I found an article in the May/June 2008 AMSAT Journal that looked promising but there are no hard numbers, just the formulas and I don't have a calculator capable of some of the computations, much less being able to work them out in my head. Been a long time since I was in school!.. hi hi... I have a downconverter I'm not sure even works and I don't want to spend a huge amount of time and trouble to be able to test it. Tnx and 73, Michael, W4HIJ _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Actually:
A comprehensive FAQ with a good search engine linked from the Amsat webpage would serve well. I know you want me to do it. Sorry, I don' t have the computer skills. But if such were to exist, when someone new asks one of the standard questions then all you need is to refer them to the FAQ (and anyone else reading the mail can also look for themselves). If the FAQ does not completely cover the question that a reader has - - then come back and ask on the -bb.
Many good "new" questions come up and can be handled, here, so I do not think a separate forum list is needed. I already read about 8 lists as it is. Those that often answer certain questions could submit the item to be included in the FAQ. (i.e. I would offer noise figure and preamp answers). Others, might offer answers on "fixing the Yaesu az-el rotor" or software questions, Doppler tracking, Transponder on the Moon, what happened to AO-40, etc.
my two cents. Ed, KL7UW
At 11:47 PM 10/30/2009, Andrew Rich wrote:
You know this amsat-bb needs to collect up all the info and make a forum web page
Same old info over and over
----- Original Message ----- From: "Greg D." [email protected] To: [email protected]; [email protected] Sent: Saturday, October 31, 2009 5:15 PM Subject: [amsat-bb] Re: Simple 2.4Ghz helix plans?
Hi Michael,
I followed instructions from Howard Long, G6LVB, posted here a few years ago. (If the archives go back far enough, it was in November of 2001). I don't have it electronically, but the instructions went something like this:
Get a long piece of thick bare copper wire (#10 is what I think I used), and put a small mark on it every 5 3/4 inches (146mm). Sharpie marker works well. Wrap it around a cardboard tube that's about 1 3/4 inches in diameter. The tube from a roll of paper towels works fine; the dimension is not critical. Space the turns about 1 1/4 inches (32mm) apart.
Now, here's the magic part: once you get the helix about right, sight down one edge, and you'll see those 146mm marks you made in the first step. Twist and stretch the coils so that they all line up, AND at the same time, keep the turns spaced (center to center) 32mm apart. Take your time. The diameter of the turns will take care of itself.
For the first 1/4 turn (the matching section), decrease the pitch so that it gently slopes away from the reflector, which needs to be something around 4 or so inches in diameter. The rest of the mechanical stuff you can pretty much make up yourself. There are a lot of examples if you browse around the web a bit.
Helix antennas are pretty forgiving in construction, and really cheap to make.
Greg KO6TH
p.s. If you already have a Wi-Fi antenna, it should work too. Conversely, I've found that a Helix easily outperforms those "Pringles can" Wi-Fi antennas that were popular a few years ago, in a Wi-Fi application.
Date: Sat, 31 Oct 2009 00:03:02 -0400 From: [email protected] To: [email protected] Subject: [amsat-bb] Simple 2.4Ghz helix plans?
I threw this out there on the eham satellite forum looking for answers but I'll try here too. I'm looking for some fairly simple plans for this antenna. Everything I find either seems to be intended for WiFi or if it is ham related is full of mathematical formulas to figure length, diameter, spacing etc. Math was never my strong suit so I'd prefer to find something with the actual already computed dimensions clearly stated. Preferably in English rather than metric measurements. I found an article in the May/June 2008 AMSAT Journal that looked promising but there are no hard numbers, just the formulas and I don't have a calculator capable of some of the computations, much less being able to work them out in my head. Been a long time since I was in school!.. hi hi... I have a downconverter I'm not sure even works and I don't want to spend a huge amount of time and trouble to be able to test it. Tnx and 73, Michael, W4HIJ _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Windows 7: Simplify your PC. Learn more.
http://www.microsoft.com/Windows/windows-7/default.aspx?ocid=PID24727::T:WLM...
Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.423 / Virus Database: 270.14.39/2470 - Release Date: 10/30/09 15:18:00
Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
73, Ed - KL7UW, WD2XSH/45 ====================================== BP40IQ 500 KHz - 10-GHz www.kl7uw.com 500-KHz/CW, 144-MHz EME, 1296-MHz EME DUBUS Magazine USA Rep [email protected] ======================================
I apologize if I asked for redundant information but googling brought up a multitude of WiFi designs. Whatever ham radio application pages there were must have been buried in all that. My query here has given me just what I was looking for, several sources of solid information and also even some offers of help. I appreciate it very much. Tnx and 73, Michael, W4HIJ Andrew Rich wrote:
You know this amsat-bb needs to collect up all the info and make a forum web page
Same old info over and over
There's no such thing as a redundant question. New people are popping in and out of this bb all the time. Besides when different people are giving out similar information there must be something to it.
73 Bob W7LRD
----- Original Message ----- From: "Michael Tondee" [email protected] Cc: [email protected] Sent: Saturday, October 31, 2009 11:45:21 AM GMT -08:00 US/Canada Pacific Subject: [amsat-bb] Re: Simple 2.4Ghz helix plans?
I apologize if I asked for redundant information but googling brought up a multitude of WiFi designs. Whatever ham radio application pages there were must have been buried in all that. My query here has given me just what I was looking for, several sources of solid information and also even some offers of help. I appreciate it very much. Tnx and 73, Michael, W4HIJ Andrew Rich wrote:
You know this amsat-bb needs to collect up all the info and make a forum web page
Same old info over and over
_______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (8)
-
Alan VE4YZ -
Andrew Rich -
Ben Jackson -
Bob- W7LRD -
Edward Cole -
Greg D. -
Luc Leblanc -
Michael Tondee