Is anyone using the Icom 9100 to RX 9600 baud Fox Telemetry thru the USB port? I'm using the 9100 this way to collect Falconsat-3 telemetry, but not able to do so with the Fox telemetry. I also can RX 9600 baud APRS packets. I'm using the Data mode DFM, and 9600 baud menu item 57 is set to ON. I've also tried to different sound level setting in the win10 sound control panel, but no joy..
73 Jeff kb2m
I have never been able to get the USB route to work in the 9100. I suspect low frequencies are being cut off/filtered.
Mark N8MH
On Thu, Nov 21, 2019 at 9:36 AM jeff griffin via AMSAT-BB < [email protected]> wrote:
Is anyone using the Icom 9100 to RX 9600 baud Fox Telemetry thru the USB port? I'm using the 9100 this way to collect Falconsat-3 telemetry, but not able to do so with the Fox telemetry. I also can RX 9600 baud APRS packets. I'm using the Data mode DFM, and 9600 baud menu item 57 is set to ON. I've also tried to different sound level setting in the win10 sound control panel, but no joy..
73 Jeff kb2m
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
I saw this on an old AMSAT-BB email chain: https://amsat.org/pipermail/amsat-bb/2015-May/053249.html It says it has to be done through the data jack not the USB port.
Adrian AA5UK
On Thursday, November 21, 2019, 9:55:50 AM CST, Mark L. Hammond via AMSAT-BB [email protected] wrote:
I have never been able to get the USB route to work in the 9100. I suspect low frequencies are being cut off/filtered.
Mark N8MH
On Thu, Nov 21, 2019 at 9:36 AM jeff griffin via AMSAT-BB < [email protected]> wrote:
Is anyone using the Icom 9100 to RX 9600 baud Fox Telemetry thru the USB port? I'm using the 9100 this way to collect Falconsat-3 telemetry, but not able to do so with the Fox telemetry. I also can RX 9600 baud APRS packets. I'm using the Data mode DFM, and 9600 baud menu item 57 is set to ON. I've also tried to different sound level setting in the win10 sound control panel, but no joy..
73 Jeff kb2m
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Hi Mark and Jeff, In the past I would have agreed that something was being filtered out. Having recently taken some spectrum pics of DUV I'm not so sure,
https://www.dropbox.com/s/ghuo0jtg527b20s/duv.jpg?dl=0
The upper pic is the Data2 output the lower pic is USB to my eye they both look the same.
USB mode with foxtelem tries to work, you see a eye try to form, but even using Data2 for an input I rarely see the SNR exceed 5, of course the soundcard you are using can make a big difference also.
So I dunno
73 Kevin WA7FWF
On 11/21/2019 07:53, Mark L. Hammond via AMSAT-BB wrote:
I have never been able to get the USB route to work in the 9100. I suspect low frequencies are being cut off/filtered.
Mark N8MH
On Thu, Nov 21, 2019 at 9:36 AM jeff griffin via AMSAT-BB < [email protected]> wrote:
Is anyone using the Icom 9100 to RX 9600 baud Fox Telemetry thru the USB port? I'm using the 9100 this way to collect Falconsat-3 telemetry, but not able to do so with the Fox telemetry. I also can RX 9600 baud APRS packets. I'm using the Data mode DFM, and 9600 baud menu item 57 is set to ON. I've also tried to different sound level setting in the win10 sound control panel, but no joy..
73 Jeff kb2m
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
On 2019-11-21 11:41, Kevin via AMSAT-BB wrote:
USB mode with foxtelem tries to work, you see a eye try to form, but even using Data2 for an input I rarely see the SNR exceed 5, of course the soundcard you are using can make a big difference also.
I bet if someone bought Chris Thompson (G0KLA) a nice 9100, he might prioritize getting it to work. ;-)
--- Zach N0ZGO
I gave up on trying to get the 9100 to work except for the KD2C PAT board. I'm trying to get a signal from an SDRPlay RSP2 that is connected to the 9100 via the PAT V 9100. Not getting any decodes yet, messing with the VAC levels between HDSDR and Fox Telem. Anyone have this setup working? Yes the WX is bad here and I have nothing better to do :-)
73 Jeff kb2m
-----Original Message----- From: AMSAT-BB [mailto:[email protected]] On Behalf Of Kevin via AMSAT-BB Sent: Thursday, November 21, 2019 12:42 PM To: [email protected] Subject: Re: [amsat-bb] 9100 USB FoxTelemetry
Hi Mark and Jeff, In the past I would have agreed that something was being filtered out. Having recently taken some spectrum pics of DUV I'm not so sure,
https://www.dropbox.com/s/ghuo0jtg527b20s/duv.jpg?dl=0
The upper pic is the Data2 output the lower pic is USB to my eye they both look the same.
USB mode with foxtelem tries to work, you see a eye try to form, but even using Data2 for an input I rarely see the SNR exceed 5, of course the soundcard you are using can make a big difference also.
So I dunno
73 Kevin WA7FWF
On 11/21/2019 07:53, Mark L. Hammond via AMSAT-BB wrote:
I have never been able to get the USB route to work in the 9100. I suspect low frequencies are being cut off/filtered.
Mark N8MH
On Thu, Nov 21, 2019 at 9:36 AM jeff griffin via AMSAT-BB < [email protected]> wrote:
Is anyone using the Icom 9100 to RX 9600 baud Fox Telemetry thru the USB port? I'm using the 9100 this way to collect Falconsat-3 telemetry, but not able to do so with the Fox telemetry. I also can RX 9600 baud APRS packets. I'm using the Data mode DFM, and 9600 baud menu item 57 is set to ON. I've also tried to different sound level setting in the win10 sound control panel, but no joy..
73 Jeff kb2m
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
_______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
participants (5)
-
Adrian Engele -
jeff griffin -
Kevin -
Mark L. Hammond -
Zach Metzinger