LVB Tracker & SAT32PC Help making them play nicely needed
I think Bob, W7LRD, and I have a common block to some of our computer applications. I am in the process of getting my G-5500 rotor, LVB Tracker, and IC-910H to all play nicely with one another using SAT32PC software (v12.8). I am using a Panasonic Toughbook Computer with the serial port (com4) connected to the ICOM CT-17 level converter for frequency control of the IC-910. A USB port (com1) is used to talk with the LVB Tracker. Frequency control works terrific. I cannot make the rotor control work however. The LVB Tracker manually controls the rotor just fine. I can also control the rotor position by opening a terminal window and giving commands(which indicates to me commands are going down the USB pipe). When I give a park command via SAT32PC, nothing happens nor does the rotor respond to other movement commands from the SAT32PC software. I know I must be overlooking something very simple and perhaps a good nights sleep might help me to resolve my problem. Can someone share the "secret" of rotor control with me? Hopefully no secret handshakes or needed. Any help will be sincerely appreciated.
73, -james W5AOO soon to be an ex "one armed paper hanger" in the satellite arena
I just suggest to disconnect civ control and try connecting lvb tracker to the serial port used for civ. Another option wold be to try another software, for example hrd has a rotor control software I use with my lvb tracker. Then try to understand... 73, Steve - IW1RDZ
Inviata dal mio dispositivo Android.
-----Original Message----- From: James Luhn [email protected] To: [email protected] Sent: mer, 26 set 2012 6:49 Subject: [amsat-bb] LVB Tracker & SAT32PC Help making them play nicely needed
I think Bob, W7LRD, and I have a common block to some of our computer applications. I am in the process of getting my G-5500 rotor, LVB Tracker, and IC-910H to all play nicely with one another using SAT32PC software (v12.8). I am using a Panasonic Toughbook Computer with the serial port (com4) connected to the ICOM CT-17 level converter for frequency control of the IC-910. A USB port (com1) is used to talk with the LVB Tracker. Frequency control works terrific. I cannot make the rotor control work however. The LVB Tracker manually controls the rotor just fine. I can also control the rotor position by opening a terminal window and giving commands(which indicates to me commands are going down the USB pipe). When I give a park command via SAT32PC, nothing happens nor does the rotor respond to other movement commands from the SAT32PC software. I know I must be overlooking something very simple and perhaps a good nights sleep might help me to resolve my problem. Can someone share the "secret" of rotor control with me? Hopefully no secret handshakes or needed. Any help will be sincerely appreciated.
73, -james W5AOO soon to be an ex "one armed paper hanger" in the satellite arena _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (2)
-
iw1rdz＠yahoo.it -
James Luhn