Re: Mesat-1 telemetry is on continuously
Hi John, yes, that's the right mode to select. What are you using to receive? Running Foxtelem is pretty straightforward, once you get the audio coming into the program populate the settings menu--including the selection of "upload to server!"
Mark L. Hammond [N8MH] AMSAT Director and Command Station
On Tue, Jul 9, 2024 at 3:49 PM John Antonuk - AL7ID via AMSAT-BB < amsat-bb@amsat.org> wrote:
I loaded the software after installing the java run time environment. I selected the MESAT1 satellite. Which Telem Format should I choose? The default came up as FSK 200bps (Fox1), but I think it is BPSK 1200 bps (LTM), is that correct?
73,
John Antonuk
AL7ID@yahoo.com
On Tuesday, July 9, 2024 at 11:09:36 AM AKDT, Joseph B. Fitzgerald via AMSAT-BB amsat-bb@amsat.org wrote:
The FoxTlm software is available at https://www.amsat.org/foxtelem-software-for-windows-mac-linux/
Follow the installation instructions and you will forward the telemetry to the AMSAT operations team to aid in commissioning this new bird.
de KM1P Joe
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
My satellite station is M2 LEO pack antennas on a Yaesu G5500DC AZ/EL rotor with 70cm preamp, LMR600 coax on 70cm, LMR400 coax on 2M, to Icom IC-9700 radio, with radio and rotor controlled by the CSN Technologies SAT controller, I downloaded the Fox Telem Decoder software. I will have a good pass about 0420Z 10-July-2024
73,
John Antonuk
AL7ID@yahoo.com
On Tuesday, July 9, 2024 at 11:54:14 AM AKDT, Mark L. Hammond marklhammond@gmail.com wrote:
Hi John, yes, that's the right mode to select. What are you using to receive? Running Foxtelem is pretty straightforward, once you get the audio coming into the program populate the settings menu--including the selection of "upload to server!" Mark L. Hammond [N8MH]AMSAT Director and Command Station
On Tue, Jul 9, 2024 at 3:49 PM John Antonuk - AL7ID via AMSAT-BB amsat-bb@amsat.org wrote:
I loaded the software after installing the java run time environment.I selected the MESAT1 satellite.Which Telem Format should I choose?The default came up as FSK 200bps (Fox1), but I think it is BPSK 1200 bps (LTM), is that correct?
73,
John Antonuk
AL7ID@yahoo.com
On Tuesday, July 9, 2024 at 11:09:36 AM AKDT, Joseph B. Fitzgerald via AMSAT-BB amsat-bb@amsat.org wrote:
The FoxTlm software is available at https://www.amsat.org/foxtelem-software-for-windows-mac-linux/
Follow the installation instructions and you will forward the telemetry to the AMSAT operations team to aid in commissioning this new bird.
de KM1P Joe
-----------------------------------------------------------
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
-----------------------------------------------------------
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Good deal. You should have some success, depending on the attitude of the satellite. For your 9700, I suggest starting with a downlink of 435798.5 USB. Should be close enough to hear and maybe print.
Mark L. Hammond [N8MH] AMSAT Director and Command Station
On Tue, Jul 9, 2024 at 3:59 PM John Antonuk - AL7ID al7id@yahoo.com wrote:
My satellite station is M2 LEO pack antennas on a Yaesu G5500DC AZ/EL rotor with 70cm preamp, LMR600 coax on 70cm, LMR400 coax on 2M, to Icom IC-9700 radio, with radio and rotor controlled by the CSN Technologies SAT controller, I downloaded the Fox Telem Decoder software. I will have a good pass about 0420Z 10-July-2024
73,
John Antonuk
AL7ID@yahoo.com
On Tuesday, July 9, 2024 at 11:54:14 AM AKDT, Mark L. Hammond < marklhammond@gmail.com> wrote:
Hi John, yes, that's the right mode to select. What are you using to receive? Running Foxtelem is pretty straightforward, once you get the audio coming into the program populate the settings menu--including the selection of "upload to server!"
Mark L. Hammond [N8MH] AMSAT Director and Command Station
On Tue, Jul 9, 2024 at 3:49 PM John Antonuk - AL7ID via AMSAT-BB < amsat-bb@amsat.org> wrote:
I loaded the software after installing the java run time environment. I selected the MESAT1 satellite. Which Telem Format should I choose? The default came up as FSK 200bps (Fox1), but I think it is BPSK 1200 bps (LTM), is that correct?
73,
John Antonuk
AL7ID@yahoo.com
On Tuesday, July 9, 2024 at 11:09:36 AM AKDT, Joseph B. Fitzgerald via AMSAT-BB amsat-bb@amsat.org wrote:
The FoxTlm software is available at https://www.amsat.org/foxtelem-software-for-windows-mac-linux/
Follow the installation instructions and you will forward the telemetry to the AMSAT operations team to aid in commissioning this new bird.
de KM1P Joe
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
OK, I got some telemetry over Alaska tonight.I didn't get "upload" set until after the pass and the data was down. How do I know if it went?
73,
John Antonuk
AL7ID@yahoo.com
On Tuesday, July 9, 2024 at 11:54:14 AM AKDT, Mark L. Hammond marklhammond@gmail.com wrote:
Hi John, yes, that's the right mode to select. What are you using to receive? Running Foxtelem is pretty straightforward, once you get the audio coming into the program populate the settings menu--including the selection of "upload to server!" Mark L. Hammond [N8MH]AMSAT Director and Command Station
On Tue, Jul 9, 2024 at 3:49 PM John Antonuk - AL7ID via AMSAT-BB amsat-bb@amsat.org wrote:
I loaded the software after installing the java run time environment.I selected the MESAT1 satellite.Which Telem Format should I choose?The default came up as FSK 200bps (Fox1), but I think it is BPSK 1200 bps (LTM), is that correct?
73,
John Antonuk
AL7ID@yahoo.com
On Tuesday, July 9, 2024 at 11:09:36 AM AKDT, Joseph B. Fitzgerald via AMSAT-BB amsat-bb@amsat.org wrote:
The FoxTlm software is available at https://www.amsat.org/foxtelem-software-for-windows-mac-linux/
Follow the installation instructions and you will forward the telemetry to the AMSAT operations team to aid in commissioning this new bird.
de KM1P Joe
-----------------------------------------------------------
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
-----------------------------------------------------------
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Well done! If data was uploaded then your station name will be listed here; https://www.amsat.org/tlm/leaderboard.php?id=10&db=FOXDB&show=all&am...
You may have to expand it to show all stations as it defaults to showing only the top 10.
We don't have a convenient way to resend your data if you didn't send it live. If you have a recording of the pass you can reprocess it.
73 Chris
On Wed, Jul 10, 2024, 01:37 John Antonuk - AL7ID al7id@yahoo.com wrote:
OK, I got some telemetry over Alaska tonight. I didn't get "upload" set until after the pass and the data was down.
How do I know if it went?
73,
John Antonuk
AL7ID@yahoo.com
On Tuesday, July 9, 2024 at 11:54:14 AM AKDT, Mark L. Hammond < marklhammond@gmail.com> wrote:
Hi John, yes, that's the right mode to select. What are you using to receive? Running Foxtelem is pretty straightforward, once you get the audio coming into the program populate the settings menu--including the selection of "upload to server!"
Mark L. Hammond [N8MH] AMSAT Director and Command Station
On Tue, Jul 9, 2024 at 3:49 PM John Antonuk - AL7ID via AMSAT-BB < amsat-bb@amsat.org> wrote:
I loaded the software after installing the java run time environment. I selected the MESAT1 satellite. Which Telem Format should I choose? The default came up as FSK 200bps (Fox1), but I think it is BPSK 1200 bps (LTM), is that correct?
73,
John Antonuk
AL7ID@yahoo.com
On Tuesday, July 9, 2024 at 11:09:36 AM AKDT, Joseph B. Fitzgerald via AMSAT-BB amsat-bb@amsat.org wrote:
The FoxTlm software is available at https://www.amsat.org/foxtelem-software-for-windows-mac-linux/
Follow the installation instructions and you will forward the telemetry to the AMSAT operations team to aid in commissioning this new bird.
de KM1P Joe
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
thanks for your reply. I'm not on the list and I have copied data on 3 passes now. I must be doing something wrong. Is there an elmer I can talk to?
73,
John Antonuk
AL7ID@yahoo.com
On Wednesday, July 10, 2024 at 10:25:53 AM AKDT, Chris Thompson chrisethompson@gmail.com wrote:
Well done! If data was uploaded then your station name will be listed here;https://www.amsat.org/tlm/leaderboard.php?id=10&db=FOXDB&show=all&am...
You may have to expand it to show all stations as it defaults to showing only the top 10. We don't have a convenient way to resend your data if you didn't send it live. If you have a recording of the pass you can reprocess it. 73Chris On Wed, Jul 10, 2024, 01:37 John Antonuk - AL7ID al7id@yahoo.com wrote:
OK, I got some telemetry over Alaska tonight.I didn't get "upload" set until after the pass and the data was down. How do I know if it went?
73,
John Antonuk
AL7ID@yahoo.com
On Tuesday, July 9, 2024 at 11:54:14 AM AKDT, Mark L. Hammond marklhammond@gmail.com wrote:
Hi John, yes, that's the right mode to select. What are you using to receive? Running Foxtelem is pretty straightforward, once you get the audio coming into the program populate the settings menu--including the selection of "upload to server!" Mark L. Hammond [N8MH]AMSAT Director and Command Station
On Tue, Jul 9, 2024 at 3:49 PM John Antonuk - AL7ID via AMSAT-BB amsat-bb@amsat.org wrote:
I loaded the software after installing the java run time environment.I selected the MESAT1 satellite.Which Telem Format should I choose?The default came up as FSK 200bps (Fox1), but I think it is BPSK 1200 bps (LTM), is that correct?
73,
John Antonuk
AL7ID@yahoo.com
On Tuesday, July 9, 2024 at 11:09:36 AM AKDT, Joseph B. Fitzgerald via AMSAT-BB amsat-bb@amsat.org wrote:
The FoxTlm software is available at https://www.amsat.org/foxtelem-software-for-windows-mac-linux/
Follow the installation instructions and you will forward the telemetry to the AMSAT operations team to aid in commissioning this new bird.
de KM1P Joe
-----------------------------------------------------------
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
-----------------------------------------------------------
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
participants (3)
-
Chris Thompson -
John Antonuk - AL7ID -
Mark L. Hammond