----- Original Message ----- From: "Pedro Cruz" [email protected] To: [email protected] Sent: Monday, January 31, 2011 2:09 PM Subject: : SSB pre-Amps

Hi Tom

I also have an icom 910H and VHF and UHF preamps.

You power it direct from the rig without the bias-t ?

Whem you tx the pre amp the rig remove pwr from the preamps?

Best 73 !

Pedro Cruz - CU2JX

----- Original Message ----- From: "K8TB" [email protected] To: [email protected] Sent: Sunday, January 30, 2011 8:56 PM Subject: [amsat-bb] Re: SSB pre-Amps

...

Dave,

I have a pair and in my case they are powered right up the coax to

the rig by the IC-910H. They are very good, albeit expensive preamps, and they make a huge difference for my setup, as I have a 150 foot run of rg-8 to the antennas.

 tom K8TB

On 1/30/2011 4:31 PM, Dave wrote:

...

Hi group- Is anyone using the SSBUSA-2000 and SSBUSA-7000 pre-amps? How are you powering them?

Thanks,

Dave KA0SWT

---

Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb