Nick,

I had something similar happen, and just popped open the terminal block. Nothing tricky, and the problem was obvious "by inspection."

Good luck,

Alan WA4SCA

-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Nick Pugh Sent: Sunday, June 02, 2013 2:13 PM To: 'Nick Pugh'; amsat-bb@amsat.org Subject: [amsat-bb] Re: help with M^2 2MCP22

Thanks to all that responded. The problem the F connector is spinning on the block and I might have broken termini connection. I am looking for the actual wiring diagram at the driven element so I can check it with a ohm meter.

Does anyone know how it is connected?

-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Nick Pugh Sent: Sunday, June 02, 2013 4:20 AM To: amsat-bb@amsat.org Subject: [amsat-bb] help with M^2 2MCP22

We have high SWR on our M^2 2MCP22 that has been up for several years . Does someone on the list have the wiring digram of the block where the hairpin coax is connected to the driven elements.

Thanks

nick ARS K5QXJ EM30xa 30.1N 92.1W

Office 337 593 8700

Cell 337 258 2527

Helping UL become a world Class Engineering and Educational School

_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb