Hmmm. This trick has worked for some people, but apparently there is another variable we are not aware of.

73,

Alan WA4SCA

<-----Original Message----- <From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of jeff <griffin via AMSAT-BB <Sent: Wednesday, October 30, 2019 07:43 AM <To: amsat-bb@AMSAT.Org <Subject: Re: [amsat-bb] IC-9700 & foxtelem 1.08p < <I tried that yesterday and it didn't work.... < < <73 Jeff kb2m < <-----Original Message----- <From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Alan <via AMSAT-BB <Sent: Wednesday, October 30, 2019 2:21 AM <To: Kevin; amsat-bb@amsat.org <Subject: Re: [amsat-bb] IC-9700 & foxtelem 1.08p < <I you are using the Raised Cosine decoder, try the Windows Sinc instead. < <73, < <Alan <WA4SCA < < <From: Kevin via AMSAT-BB <Sent: Wednesday, October 30, 2019 12:21 AM <To: amsat-bb@amsat.org <Subject: [amsat-bb] IC-9700 & foxtelem 1.08p < <Hi All, < Any IC-9700 users out there that have switched to foxtelem 1.08p <using USB and IQ mode? I see a good eye but get zero decodes, dropping <back to 1.07y and it all starts working again. < <73 <Kevin WA7FWF < <_______________________________________________ <Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available <to all interested persons worldwide without requiring membership. Opinions <expressed <are solely those of the author, and do not reflect the official views of AMSAT- <NA. <Not an AMSAT-NA member? Join now to support the amateur satellite <program! <Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb