That's what I was using.?? Like I said, I was probably just out-gunned by more powerful stations.

73,

Mac / AE5PH

On 6/23/19 11:01 PM, Stephen E. Belter wrote:

Mac,

I used these frequencies from the @Diwata2PH Twitter home page: Uplink 437.500 MHz, 141.3 Hz CTCSS Downlink 145.900 MHz

I had no trouble getting into PO-101 on three passes during Field Day. I was able to talk to myself for all three passes for the entire pass.

Of course, I was in Copper Center, Alaska and nobody else within range was heard.

My point is that these frequencies worked, so the AMSAT website and their Twitter home page are most likely correct. My station was a standard Arrow, IC-9700, with manual tuning.

73, Steve N9IP

Steve Belter, seb@wintek.com

???On 6/23/19, 7:35 PM, "AMSAT-BB on behalf of Mac A. Cody via AMSAT-BB" <amsat-bb-bounces@amsat.org on behalf of amsat-bb@amsat.org> wrote:

 On the AMSAT FM Satellite Frequency Summary it lists the
 up-link frequency for PO-101 (Diwata-2) as 437.500 MHz.
 On the PHL Microsat website, the up-link frequency is
 listed as 437.7 MHz.?? Which is correct??? I tried to
 work PO-101 during Field Day yesterday and had no
 success getting in with my radio set to 437.500 MHz,
 and Doppler-shift adjusted near values.?? Of course,
 being Field Day, I could have just been 'out-gunned'.
 I do wonder, though.

 73,

 Mac / AE5PH
 _______________________________________________
 Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available
 to all interested persons worldwide without requiring membership. Opinions expressed
 are solely those of the author, and do not reflect the official views of AMSAT-NA.
 Not an AMSAT-NA member? Join now to support the amateur satellite program!
 Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb