-----Original Message-----
From: David Palmer KB5WIA [email protected]
Question to the list: does anyone have a G5500 azimuth rotator with a working motor available for parts? Or any other ideas for replacement?
I successfully transplanted a G-450 motor into one of my 5500s after a similar occurrence. The used 450 was less than the motor from Yaesu parts, and I sold the control box and housing on Ebay for almost as much as I picked the whole thing up for.
73, Drew KO4MA
Dave, Drew suggests what I was going to pass on to you...Keep this in mind for future posts. 73, Dee, NB2F
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Andrew Glasbrenner Sent: Thursday, February 23, 2012 10:05 AM To: David Palmer KB5WIA; AMSAT BB Subject: [amsat-bb] Re: Motor for Yaesu G5500 Azimuth Rotator?
-----Original Message-----
From: David Palmer KB5WIA [email protected]
Question to the list: does anyone have a G5500 azimuth rotator with a working motor available for parts? Or any other ideas for replacement?
I successfully transplanted a G-450 motor into one of my 5500s after a similar occurrence. The used 450 was less than the motor from Yaesu parts, and I sold the control box and housing on Ebay for almost as much as I picked the whole thing up for.
73, Drew KO4MA
_______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (2)
-
Andrew Glasbrenner -
Dee