hi folks, on mixw, mode settings sstv it says xmit freq 1900 hz and recv,. freq 1900 hz. my pics are coming in garble, should i change this? If so to what? any other settting I should have here?
kc8gkf
hi folks, on mixw, mode settings sstv it says xmit freq 1900 hz and recv,. > freq 1900 hz. my pics are coming in garble, should i change this? If so to > what? any other settting I should have here?
Hi Jeff,
I only set the mode to R36, everything worked fine.... also with 1900mhz... you can see the "half" image I captured at 16:16z using MixW 2.18 in
73's de
Rafael XE2RV DL55lt
Rafael Valdez G. wrote:
hi folks, on mixw, mode settings sstv it says xmit freq 1900 hz and recv,. > freq 1900 hz. my pics are coming in garble, should i change this? If so to > what? any other settting I should have here?
Hi Jeff,
I only set the mode to R36, everything worked fine.... also with 1900mhz... you can see the "half" image I captured at 16:16z using MixW 2.18 in
73's de
Rafael XE2RV DL55lt
I record the pass and then set about decoding it later. The first decode of the ISS image I captured was terribly skewed, but I was able to adjust qsstv on subsequent attempts to get it bob on.
Gordon
participants (3)
-
Gordon JC Pearce MM3YEQ
-
Mr Jeffrey L Ross
-
Rafael Valdez G.