I downloaded new keps now I get a box that says," ungultrige Gleitkommaoperation" marching across the screen that won't stop unless I restart the computer. Assistance please.
73 Bob W7LRD
Make sure CO-56 is not selected to your group. I had the same trouble until removing it. It's no longer in orbit, so the Keps must be omitted from the file.
Good luck, Elan - WB2IOL
--- On Sun, 12/20/09, Bob- W7LRD w7lrd@comcast.net wrote:
From: Bob- W7LRD w7lrd@comcast.net Subject: [amsat-bb] satpc ?? To: amsat-bb@amsat.org Date: Sunday, December 20, 2009, 12:25 AM
I downloaded new keps now I get a box that says," ungultrige Gleitkommaoperation" marching across the screen that won't stop unless I restart the computer. Assistance please.
73 Bob W7LRD _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
I get the same problem myself, but ONLY on the 12.8 version of SatPC32.
I have the exact same setup on 12.7, and it works just fine.
Even copied the same amateur.txt and Doppler.sqf files from one to the other just to ensure I didn't have a typo somewhere.
Walter/K5WH ...
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Bob- W7LRD Sent: Sunday, December 20, 2009 12:26 AM To: amsat-bb@amsat.org Subject: [amsat-bb] satpc ??
I downloaded new keps now I get a box that says," ungultrige Gleitkommaoperation" marching across the screen that won't stop unless I restart the computer. Assistance please.
73 Bob W7LRD _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
I just noticed that my FT-847 is having a problem with PL tones. There are a few things happening... It seems to want to stay only in a PL of 67.0. When I try to operate on SO-67 that has a PL of 233.6, I can't get into the bird, unless I tailgate. As it seems to default to a PL of 67.0 I can work SO-50 no problem. I checked all my cables, and also went to a different software control program and it all points to a problem with my 847. After some testing with different PL's, using another radio with TQSL set, it seems that when in Satellite mode my 847 will only transmit a PL of 67. I've had my 847 I bought new since 1997 and I never had a problem with This. When I look back I can't remember when I needed any other PL other then 67.0, except 74.4 to open up SO-50, last time about 3 years ago. Before I try a full reset I thought I would ask here, to make sure I'm not missing anything stupid...
73 Jeff kb2m
On Sun, December 20, 2009 18:03, Jeff KB2M wrote:
Hi Jeff,
I just noticed that my FT-847 is having a problem with PL tones. There are a few things happening... It seems to want to stay only in a PL of 67.0. When I try to operate on SO-67 that has a PL of 233.6, I can't get into the bird, unless I tailgate.
How do you operate the PL Tone?
Manual or via Tracking Software? If it is software, let is know what software you are using, maybe we can help.
I have a FT-847 also and with both SatPC32 and HRD no problems, HRD doesn't want to operate via the Satellite Tracking software, so have to do this via Ham Radio de Luxe main screen.
73 Jeff kb2m
73's Jan - PE0SAT
I just noticed that my FT-847 is having a problem with PL tones. There are a few things happening... It seems to want to stay only in a PL of 67.0. When I try to operate on SO-67 that has a PL of 233.6, I can't get into the bird, unless I tailgate. As it seems to default to a PL of 67.0 I can work SO-50 no problem. I checked all my cables, and also went to a different software control program and it all points to a problem with my 847. After some testing with different PL's, using another radio with TQSL set, it seems that when in Satellite mode my 847 will only transmit a PL of 67. I've had my 847 I bought new since 1997 and I never had a problem with This. When I look back I can't remember when I needed any other PL other then 67.0, except 74.4 to open up SO-50, last time about 3 years ago. Before I try a full reset I thought I would ask here, to make sure I'm not missing anything stupid...
73 Jeff kb2m
Hi
Press the MENU button, rotate the SUB-TUNE knob to select Menu #12, That is "TONE-FRQ". Then rotate the MEM/VFO CH knob to set the right PL. Then press the MENU again to exit.
To activate PL just select FM-mode and press the grey TONE knob (3). There is a sign ENC visible. You can check that the PL is correct by pressing the MENU again. IF not, just rotate the MEM/VFO CH knob.
If that doesn't work out, maybe the memory backup battery has run out of juice. Check also the position of the battery backup switch.
73'
-Jari oh3uw
Hello Jeff, SatPC32 sets the FT-847 sub tone frequency for SO-67 (233.6 Hz) correctly. I suppose you have the following data line added to SubTone.SQF: SO-67,233.6,$01,36 The Parameter $01 is the code of the FT-847 for a 233.6 tone. .
To check the tone frequency do the following: Select SO-67. CAT steering must be on (C+) Click the control T0 to T1. Above the VHF uplink freqence an "ENC" appears. Disable CAT (C-). At the radio switch the bands. The VHF frequency must be on the left side. Now press the "Menu" button at the FT-847 and select menu #12. In the display you will see the tone frequency 233.6.
73s, Erich, DK1T
----- Original Message ----- From: "Jeff KB2M" kb2m@comcast.net To: amsat-bb@amsat.org Sent: Sunday, December 20, 2009 6:03 PM Subject: [amsat-bb] 847 PL problems
I just noticed that my FT-847 is having a problem with PL tones. There are a few things happening... It seems to want to stay only in a PL of 67.0. When I try to operate on SO-67 that has a PL of 233.6, I can't get into the bird, unless I tailgate. As it seems to default to a PL of 67.0 I can work SO-50 no problem. I checked all my cables, and also went to a different software control program and it all points to a problem with my 847. After some testing with different PL's, using another radio with TQSL set, it seems that when in Satellite mode my 847 will only transmit a PL of 67. I've had my 847 I bought new since 1997 and I never had a problem with This. When I look back I can't remember when I needed any other PL other then 67.0, except 74.4 to open up SO-50, last time about 3 years ago. Before I try a full reset I thought I would ask here, to make sure I'm not missing anything stupid...
73 Jeff kb2m
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
I fixed the problem with a full reset. In fact this one of the few times that a full reset actually fixed my problem with a radio! I'm sorry I wasn't as clear as I should have been in describing my problem. I did say that I could set a PL other than 67.0 when I didn't have the 847 in satellite mode. When I took it out of sat mode I could achieve a PL of other then 67.0. I also mentioned that it used to work, for at least 10 years. Weird problem, that thankfully was easy to fix...
and it all points to a problem with my 847. After some testing with different PL's, using another radio with TQSL set, it seems that when in Satellite mode my 847 will only transmit a PL of 67. I've had my 847 I bought new since 1997 and I never had a problem with This.
73 Jeff fkb2m
-----Original Message----- From: Erich Eichmann [mailto:erich.eichmann@t-online.de] Sent: Sunday, December 20, 2009 2:07 PM To: Jeff KB2M Cc: amsat-bb@amsat.org Subject: Re: [amsat-bb] 847 PL problems
Hello Jeff, SatPC32 sets the FT-847 sub tone frequency for SO-67 (233.6 Hz) correctly. I suppose you have the following data line added to SubTone.SQF: SO-67,233.6,$01,36 The Parameter $01 is the code of the FT-847 for a 233.6 tone. .
To check the tone frequency do the following: Select SO-67. CAT steering must be on (C+) Click the control T0 to T1. Above the VHF uplink freqence an "ENC" appears. Disable CAT (C-). At the radio switch the bands. The VHF frequency must be on the left side. Now press the "Menu" button at the FT-847 and select menu #12. In the display you will see the tone frequency 233.6.
73s, Erich, DK1T
----- Original Message ----- From: "Jeff KB2M" kb2m@comcast.net To: amsat-bb@amsat.org Sent: Sunday, December 20, 2009 6:03 PM Subject: [amsat-bb] 847 PL problems
I just noticed that my FT-847 is having a problem with PL tones. There are a few things happening... It seems to want to stay only in a PL of 67.0. When I try to operate on SO-67 that has a PL of 233.6, I can't get into the bird, unless I tailgate. As it seems to default to a PL of 67.0 I can work SO-50 no problem. I checked all my cables, and also went to a different software control program and it all points to a problem with my 847. After some testing with different PL's, using another radio with TQSL set, it seems that when in Satellite mode my 847 will only transmit a PL of 67. I've had my 847 I bought new since 1997 and I never had a problem with This. When I look back I can't remember when I needed any other PL other then 67.0, except 74.4 to open up SO-50, last time about 3 years ago. Before I try a full reset I thought I would ask here, to make sure I'm not missing anything stupid...
73 Jeff kb2m
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Jeff,
Do you have a PL tone stored in the current satellite channel? Some time back, 2-3 years, I found that there seemed to be a conflict in programming the PL frequency if one was stored in memory. I switched to another satellite channel without a PL tone stored, and the problem went away. I just let SATPC32 take care of it. Easy enough to check, unless all your satellite channels have tones stored.
Good luck,
Alan WA4SCA
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Jeff KB2M Sent: 20 December, 2009 11:03 To: amsat-bb@amsat.org Subject: [amsat-bb] 847 PL problems
I just noticed that my FT-847 is having a problem with PL tones. There are a few things happening... It seems to want to stay only in a PL of 67.0. When I try to operate on SO-67 that has a PL of 233.6, I can't get into the bird, unless I tailgate. As it seems to default to a PL of 67.0 I can work SO-50 no problem. I checked all my cables, and also went to a different software control program and it all points to a problem with my 847. After some testing with different PL's, using another radio with TQSL set, it seems that when in Satellite mode my 847 will only transmit a PL of 67. I've had my 847 I bought new since 1997 and I never had a problem with This. When I look back I can't remember when I needed any other PL other then 67.0, except 74.4 to open up SO-50, last time about 3 years ago. Before I try a full reset I thought I would ask here, to make sure I'm not missing anything stupid...
73 Jeff kb2m
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
I kinda remembered having that problem myself Alan. I tried different sat memory's one with PL and one without, but I still could only get a PL of 67. I did a full reset, and that fixed the problem. I also forgot that I had a copy of FTBasicMMO, so I stored all memories, before I did the reset, then restored. All is back to normal. So I don't know what happened as I'm using the same memories. I just tested it with a sat memory in background that contained a pl of 67, then with a non PL memory in background. Both ways let me run SatPC32 with SO-67 with a pl of 233.6. I think you and me are the only one's who have experienced this problem! Thanks for the sanity check....
73 Jeff kb2m
-----Original Message----- From: Alan P. Biddle [mailto:APBIDDLE@UNITED.NET] Sent: Sunday, December 20, 2009 3:04 PM To: 'Jeff KB2M'; amsat-bb@amsat.org Subject: RE: [amsat-bb] 847 PL problems
Jeff,
Do you have a PL tone stored in the current satellite channel? Some time back, 2-3 years, I found that there seemed to be a conflict in programming the PL frequency if one was stored in memory. I switched to another satellite channel without a PL tone stored, and the problem went away. I just let SATPC32 take care of it. Easy enough to check, unless all your satellite channels have tones stored.
Good luck,
Alan WA4SCA
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Jeff KB2M Sent: 20 December, 2009 11:03 To: amsat-bb@amsat.org Subject: [amsat-bb] 847 PL problems
I just noticed that my FT-847 is having a problem with PL tones. There are a few things happening... It seems to want to stay only in a PL of 67.0. When I try to operate on SO-67 that has a PL of 233.6, I can't get into the bird, unless I tailgate. As it seems to default to a PL of 67.0 I can work SO-50 no problem. I checked all my cables, and also went to a different software control program and it all points to a problem with my 847. After some testing with different PL's, using another radio with TQSL set, it seems that when in Satellite mode my 847 will only transmit a PL of 67. I've had my 847 I bought new since 1997 and I never had a problem with This. When I look back I can't remember when I needed any other PL other then 67.0, except 74.4 to open up SO-50, last time about 3 years ago. Before I try a full reset I thought I would ask here, to make sure I'm not missing anything stupid...
73 Jeff kb2m
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
On 20 Dec 2009 at 12:03, Jeff KB2M wrote:
Date sent: Sun, 20 Dec 2009 12:03:10 -0500 From: Jeff KB2M kb2m@comcast.net Subject: [amsat-bb] 847 PL problems To: amsat-bb@amsat.org
Before I try a full reset I
thought I would ask here, to make sure I'm not missing anything stupid...
73 Jeff kb2m
Do you try manually without any cable connected from a tracking interface to program another tone pressing menu button selecting menu item 12, then selecting any other tone and exiting pressing the menu button again. This operation should put the FT-847 in any selected tone and you just have to press the tone button (3) to enable it.
If it's not working you already have the solution that i used about 3 times since i got my 847 9 years now.
"-"
Luc Leblanc VE2DWE Skype VE2DWE www.qsl.net/ve2dwe DSTAR urcall VE2DWE WAC BASIC CW PHONE SATELLITE
This all works now Luc, after I did the reset...
73 Jeff kb2m
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Luc Leblanc Sent: Sunday, December 20, 2009 4:32 PM To: amsat-bb@amsat.org Subject: [amsat-bb] Re: 847 PL problems
On 20 Dec 2009 at 12:03, Jeff KB2M wrote:
Date sent: Sun, 20 Dec 2009 12:03:10 -0500 From: Jeff KB2M kb2m@comcast.net Subject: [amsat-bb] 847 PL problems To: amsat-bb@amsat.org
Before I try a full reset I
thought I would ask here, to make sure I'm not missing anything stupid...
73 Jeff kb2m
Do you try manually without any cable connected from a tracking interface to program another tone pressing menu button selecting menu item 12, then selecting any other tone and exiting pressing the menu button again. This operation should put the FT-847 in any selected tone and you just have to press the tone button (3) to enable it.
If it's not working you already have the solution that i used about 3 times since i got my 847 9 years now.
"-"
Luc Leblanc VE2DWE Skype VE2DWE www.qsl.net/ve2dwe DSTAR urcall VE2DWE WAC BASIC CW PHONE SATELLITE
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Das meanst dat du bist nicht finger-gepoken an die computer, und nicht tinkeren mit die kommunikatorien.
Seriously, it means invalid floating point operation.
Something going on there. What is your OS?
Mark Lunday WD4ELG Greensboro, NC - FM06be wd4elg@arrl.net http://wd4elg.net http://wd4elg.blogspot.com
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Bob- W7LRD Sent: Sunday, December 20, 2009 1:26 AM To: amsat-bb@amsat.org Subject: [amsat-bb] satpc ??
I downloaded new keps now I get a box that says," ungultrige Gleitkommaoperation" marching across the screen that won't stop unless I restart the computer. Assistance please.
73 Bob W7LRD _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (10)
-
Alan P. Biddle
-
Bob- W7LRD
-
Elan Portnoy
-
Erich Eichmann
-
Jari Koivurinne
-
Jeff KB2M
-
Luc Leblanc
-
Mark Lunday
-
PE0SAT
-
Walter Holmes