Hi Mark,

I have used the ISIS internal decoding software. I'm not sure if the polish team provides a client to collect and submit telemetry. We can understand parts of their ASCII telemetry by reading the values and converting them using various product manuals.

According to me, I had the very first packet received (a couple of minutes before the pass over Poland)

73

Wouter PA3WEG

On Tue, Feb 14, 2012 at 2:53 AM, Mark L. Hammond marklhammond@gmail.com wrote:

Congratulations, Wouter.

Is there a client software for amateurs to collect and submit telemetry?

If so, where can it be downloaded?

Thanks,

Mark N8MH

At 05:41 PM 2/13/2012 +0100, wouter weggelaar wrote:

...

Hi All,

PW-Sat has been decoded using the ISIS GSKit on the first and 3rd pass of PW-SAT over Delft.

On the third pass we also connected SDR hardware to 70cm to listen for the other cubes A spectrum plot can be found at http://www.pa3weg.nl/pa3weg/images/Spectrum_plot_PA3WEG_3rd_pass_1537UTC.jpg and the recording of PW-SAT at http://www.pa3weg.nl/pa3weg/recordings/PW-SAT%20recording%20PA3WEG%2013-02-2...

As you can imagine, all our engineers gathered around when they heard familiar BPSK 1200 sounds ;) http://www.pa3weg.nl/pa3weg/images/TrackingVEGA01.jpg http://www.pa3weg.nl/pa3weg/images/TrackingVEGA02.jpg

We have heard:

• PW-Sat
• MaSat-1
• XatCobeo
• Probably AlmaSat

Nothing heard from Goliat, Robusta and UniCubeSat

Wouter Weggelaar PA3WEG ISIS RF Engineer _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb