When i key the mike the needle does not move forward to indicate the power output level but instead moves to the left and bottoms out. I have set the drive output to various levels but it still fails to indicate power. I know it's putting out power because i can hit repeaters but it won't indicate it by the needle going forward. It goes in the opposite direction to the left. Any help will be appreciated., Thanks, Randy
Randy,
Do you perhaps have the meter set to display ALC activity? It would most likely normally stay 'hard left' in FM mode if this is the case.
Matt, KC4YLV
On Fri, Feb 29, 2008 at 2:59 PM, randy vann67@charter.net wrote:
When i key the mike the needle does not move forward to indicate the power output level but instead moves to the left and bottoms out. I have set the drive output to various levels but it still fails to indicate power. I know it's putting out power because i can hit repeaters but it won't indicate it by the needle going forward. It goes in the opposite direction to the left. Any help will be appreciated., Thanks, Randy _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (2)
-
Jonny 290 -
randy