Thanks everyone for the feedback!

All seems now to be working again properly.

I removed the existing Novakeps.dat file and repaired the software from the setup.exe programme. I then modified the internet keps update to only look at the ftp://www.amsat.org/amsat/keps/current/nasabare.txt file. This is a much smaller file than I had originally!

So far so good - after 24 hours operation the antennas are rotating properly still

73

Graham

-----Original Message----- From: Graham Shirville Sent: Sunday, November 15, 2015 10:35 AM To: AMSAT BB Subject: Nova question

Hi All,

I have been a NOVA user for many years but I know find that, when it is set up to drive the rotator to track FUNcube-1, at start up I get a Nova message box that says “ List index out of bounds (0) " - this comes up immediately, before the prog starts to update the keps, and the rotator operation is very unreliable.

I am using W10 machine and a LVB tracker box with its built in USB converter.

Any suggestions about a cure would be much appreciated...

thanks

Graham G3VZV