Are you using Satpc32 ?? If yes then check your COM PORT in SATPC32... Also Baud rate should be 57600 for the FT847.. restart your SATPC32 and try the FT847 again ... I am using the FT847 and have no problems with my power out even if not using SATPC32.. Is your Microphone plugged in and tightened ?? I once could not get my FT847 to transmit due to a short in the Microphone plug.. That's all I can think of 73 JACK/KC7MG ---- f6htj--- via AMSAT-BB amsat-bb@amsat.org wrote:

"Hello all; our F6KBR radio-club is almost ready to be active very soon via satellites with Yaesu FT847 rig but we have a big problem: no power output on SAT position. Everything else is OK, any mode... We tried full Reset (menu #39) but still same problem.

Thanks for any help. 73 de Michel F6HTJ"

Hello all; now all is OK. The problem came from ALC mod. I had to remove the final ALC 2009 mod (cut the wire) and it works on sat position.

http://www.ok2kkw.com/00000104/ft847_alc_mod/alc_ft847_en_2.htm

73 de Michel F6HTJ Amsat #7409 Radio club F6KBR (JN12kq)

---

---

Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb