Where is the source code repository for the telemetry decoder; ARISSatTLM?
From AMSAT News bulletin 170, posted Saturday:
"Download the Windows ARISSatTLM free ground station soundcard demodulator and display software: http://www.arissattlm.org/download/ARISSatTLM_050_Setup.exe
Download the Mac ARISSatTLM software: http://www.arissattlm.org/download/ARISSATTLM.zip
The ARISSatTLM software user guide is available: http://tinyurl.com/42uhtyf (amsat.org)
Get your color ARISSat-1 Frequency Guide: http://tinyurl.com/4t497t2 (amsat.org)
ARISSat-1 Presentation Slides (~1MB) http://tinyurl.com/4n4pzkm (amsat.org)"
HOpe this helps!!!
George, KA3HSW ----- Original Message ----- From: "Joe Korkin" [email protected] To: [email protected] Sent: Tuesday, June 21, 2011 3:52 PM Subject: [amsat-bb] ARISSatTLM source code
Where is the source code repository for the telemetry decoder; ARISSatTLM? _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
On Tue, 21 Jun 2011 19:08:25 -0500 "George Henry" [email protected] wrote:
HOpe this helps!!!
What the original poster was asking for is the source, rather than precompiled Windows and Mac OSX binaries.
The source doesn't seem to be available yet. It's a shame that closed-source software seems to be so common in amateur radio - you get people sharing all sorts of information, but they just don't seem to have grasped the idea that letting people see the source code is a Very Good Thing.
Gordon MM0YEQ
Well, it WAS here https://svn.sarpeidon.net/viewvc/suitsat2/ground_station_software/ARISSatTLM... , but the link doesn't appear to work anymore....
George, KA3HSW
----- Original Message ----- From: "Gordon JC Pearce" [email protected] To: [email protected] Sent: Thursday, June 23, 2011 5:40 PM Subject: [amsat-bb] Re: ARISSatTLM source code
On Tue, 21 Jun 2011 19:08:25 -0500 "George Henry" [email protected] wrote:
HOpe this helps!!!
What the original poster was asking for is the source, rather than precompiled Windows and Mac OSX binaries.
The source doesn't seem to be available yet. It's a shame that closed-source software seems to be so common in amateur radio - you get people sharing all sorts of information, but they just don't seem to have grasped the idea that letting people see the source code is a Very Good Thing.
Gordon MM0YEQ _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
On 06/23/11 18:40, Gordon JC Pearce wrote:
On Tue, 21 Jun 2011 19:08:25 -0500 "George Henry"[email protected] wrote:
HOpe this helps!!!
What the original poster was asking for is the source, rather than precompiled Windows and Mac OSX binaries.
The source doesn't seem to be available yet. It's a shame that closed-source software seems to be so common in amateur radio - you get people sharing all sorts of information, but they just don't seem to have grasped the idea that letting people see the source code is a Very Good Thing.
Gordon MM0YEQ
Yeah, absolutely this is a problem.
What bothers me the most about this is saying I don't run Windows, or MacOS, or Linux, and then I just get the <blink> <blink> response, and that's it.
I know two kids interested at least to some extent about ham radio, both who are learning and understand open source culture, who were not exactly impressed with some of the closed source programs they've seen--and wanted to improve on.
But this is changing, and is yet another reason to get more younger people involved in ham radio in general.
--STeve Andre' wb8wsf en72
On Thu, Jun 23, 2011 at 07:36:34PM -0400, STeve Andre' wrote:
On 06/23/11 18:40, Gordon JC Pearce wrote:
On Tue, 21 Jun 2011 19:08:25 -0500
...
What bothers me the most about this is saying I don't run Windows, or MacOS, or Linux, and then I just get the <blink> <blink> response, and that's it.
I got so annoyed, I wrote my own TLM decoder for AO-51. (For FreeBSD, portable enough though)
I know two kids interested at least to some extent about ham radio, both who are learning and understand open source culture, who were not exactly impressed with some of the closed source programs they've seen--and wanted to improve on.
Ditto.
But this is changing, and is yet another reason to get more younger people involved in ham radio in general.
Agreed.
wb8wsf en72
- Diane VA3DB
Hi Guys,
This has always been open source, its just that the server is temporarily down. You can find all of the original LINUX code without the GUI on Phil's web site:
We hope to have the server with the ARISSatTLM Windows code up again soon.
73, Tony AA2TX
On 6/23/2011 7:36 PM, STeve Andre' wrote:
On 06/23/11 18:40, Gordon JC Pearce wrote:
On Tue, 21 Jun 2011 19:08:25 -0500 "George Henry"[email protected] wrote:
HOpe this helps!!!
What the original poster was asking for is the source, rather than precompiled Windows and Mac OSX binaries.
The source doesn't seem to be available yet. It's a shame that closed-source software seems to be so common in amateur radio - you get people sharing all sorts of information, but they just don't seem to have grasped the idea that letting people see the source code is a Very Good Thing.
Gordon MM0YEQ
Yeah, absolutely this is a problem.
What bothers me the most about this is saying I don't run Windows, or MacOS, or Linux, and then I just get the<blink> <blink> response, and that's it.
I know two kids interested at least to some extent about ham radio, both who are learning and understand open source culture, who were not exactly impressed with some of the closed source programs they've seen--and wanted to improve on.
But this is changing, and is yet another reason to get more younger people involved in ham radio in general.
--STeve Andre' wb8wsf en72
Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Anthony, my comments were about ham software in general, not the arissattlm code. Apologies if it came off that way.
--STeve Andre' wb8wsf en72
On 06/23/11 21:57, Anthony Monteiro wrote:
Hi Guys,
This has always been open source, its just that the server is temporarily down. You can find all of the original LINUX code without the GUI on Phil's web site:
We hope to have the server with the ARISSatTLM Windows code up again soon.
73, Tony AA2TX
On 6/23/2011 7:36 PM, STeve Andre' wrote:
On 06/23/11 18:40, Gordon JC Pearce wrote:
On Tue, 21 Jun 2011 19:08:25 -0500 "George Henry"[email protected] wrote:
HOpe this helps!!!
What the original poster was asking for is the source, rather than precompiled Windows and Mac OSX binaries.
The source doesn't seem to be available yet. It's a shame that closed-source software seems to be so common in amateur radio - you get people sharing all sorts of information, but they just don't seem to have grasped the idea that letting people see the source code is a Very Good Thing.
Gordon MM0YEQ
Yeah, absolutely this is a problem.
What bothers me the most about this is saying I don't run Windows, or MacOS, or Linux, and then I just get the<blink> <blink> response, and that's it.
I know two kids interested at least to some extent about ham radio, both who are learning and understand open source culture, who were not exactly impressed with some of the closed source programs they've seen--and wanted to improve on.
But this is changing, and is yet another reason to get more younger people involved in ham radio in general.
--STeve Andre' wb8wsf en72
Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
On Thu, 23 Jun 2011 21:57:06 -0400 Anthony Monteiro [email protected] wrote:
Hi Guys,
This has always been open source, its just that the server is temporarily down. You can find all of the original LINUX code without the GUI on Phil's web site:
The stuff *without* the GUI is probably more useful to begin with, since you'd pretty much need to write the GUI from scratch ;-)
HDLC frames, y'say? Wonder if this could be used as an alternative to AFSK for packet?
We hope to have the server with the ARISSatTLM Windows code up again soon.
Yeah. You know what? Github. Or Gitorious. Or something like that - there's bound to be an Subversion-based similar site. I used to run my own Git repo for things like lysdr and aprsmap. Now they can be found on Github:
because it's more fun writing code than maintaining servers, and life's too short to do both.
73, Tony AA2TX
73, Gordon MM0YEQ
Gordon,
The source code for the decoder is what I am really interested in, and I had found the link to Phil Karns code on his site but was reluctant to use it since it is a tarzip and apparently not under source control hence probably not the latest; his site was last updated Dec 2010. The thinking is that the svn repository would contain decoder bug fixes and mods.
Joe, W2DSN
________________________________ From: Gordon JC Pearce [email protected] To: [email protected] Sent: Friday, June 24, 2011 2:59 AM Subject: [amsat-bb] Re: ARISSatTLM source code
On Thu, 23 Jun 2011 21:57:06 -0400 Anthony Monteiro [email protected] wrote:
Hi Guys,
This has always been open source, its just that the server is temporarily down. You can find all of the original LINUX code without the GUI on Phil's web site:
The stuff *without* the GUI is probably more useful to begin with, since you'd pretty much need to write the GUI from scratch ;-)
HDLC frames, y'say? Wonder if this could be used as an alternative to AFSK for packet?
We hope to have the server with the ARISSatTLM Windows code up again soon.
Yeah. You know what? Github. Or Gitorious. Or something like that - there's bound to be an Subversion-based similar site. I used to run my own Git repo for things like lysdr and aprsmap. Now they can be found on Github:
because it's more fun writing code than maintaining servers, and life's too short to do both.
73, Tony AA2TX
73, Gordon MM0YEQ _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
On 6/23/2011 9:57 PM, Anthony Monteiro wrote:
We hope to have the server with the ARISSatTLM Windows code up again soon.
The server is back on line. You can find the code at https://svn.sarpeidon.net/suitsat2/repos/ground_station_software/ARISSatTLM/
-Joe KM1P
participants (7)
-
Anthony Monteiro -
Diane Bruce -
George Henry -
Gordon JC Pearce -
Joe Fitzgerald -
Joe Korkin -
STeve Andre'