Thanks for the frames, JoAnne! The one you got the other day came in REALLY handy...so you just never know the value of your efforts to get a working system and copy some frames.

A reminder--the Transponder is OFF and will remain so for a while, while we help UMaine get the science data from their satellite. A teaser--a quick test suggests that the linear transponder operation looks pretty promising ;)

Another reminder--getting our stations "up to snuff" to copy MESAT1 is good, fun, work! Consider copying MESAT1 telemetry a good benchmark for how well you can receive on 70cm.

Happy telemetry collecting! 73,

Mark L. Hammond [N8MH] AMSAT Director and Command Station

On Sat, Jul 27, 2024 at 11:22 AM JoAnne Maenpaa via AMSAT-BB < amsat-bb@amsat.org> wrote:

Thanks Chris!

I had good copy on the beacon and decodes were flowing nicely during the Saturday morning pass. My camera tab on FoxTelem shows a few lines of the image. I'll hope for stronger signals later today.

The higher power and continuous transmission made final tweaks a lot easier :-)

Also on the IC-9700 I found that I've got use the MAIN RX (and not the SUB RX) for FoxTelem to get the data. I use 435.798 as the initial frequency as N8MH had recommended previously.

On 7/27/2024 10:08 AM, Chris Thompson via AMSAT-BB wrote:

The MESAT-1 team are continuing to test and commission the satellite. It is currently in Health Mode transmitting continuously and the downlink power is now about 6dB higher. So it should be easier to hear and decode. If you have had trouble decoding it then now is a good time to try again.

You may have seen some data from the on board Multispectral Camera Saturday morning. This was test data as part of the commissioning process. The team will attempt to capture and transmit new science data on the 01:53 UTC and 12.25 UTC passes over North America tonight and tomorrow.

73 Chris VE2TCP / G0KLA / AC2CZ

-- Chris E. Thompson chrisethompson@gmail.com g0kla@arrl.net

-- 73 de JoAnne K9JKMjoanne.k9jkm@gmail.com BM DMR TG 98006

---

Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/

View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org