Interface Cable for Yaesu G-5400B and Fox Delta ST2-0417
Does anyone make a pre-made interface cable to go between the Yaesu G-5400B and the Fox Delta ST2 Satellite Tracking Interface?
My failing eyesight have turned the joy of soldering and kit-making into a major league pain. :-(
I’d also be happy to pay someone that might be willing to make up the cable. Thanks in advance.
73,
Les Rayburn, N1LF Maylene, AL EM63nf AMSAT #38965, ARRL Life Member, CVHS Life Member, SVHF Member
Powered by Mailbutler https://www.mailbutler.io/?utm_source=watermark&utm_medium=email&utm_campaign=watermark-essential-email, the email extension that does it all
Les,
Looks like this guy is what you are looking for. It is a bit costly.
https://www.dxengineering.com/parts/etx-ars-azeldin8?seid=dxese1&gclid=C...
Else if you wanted to mail me the DIN-8 socket connector that came with the rotator or the Fox Delta, I can solder it to a spare Cat5e cable I have lying around the house and mail it back. If time is of the essence, you'll want to go with DXengineering. ;) Just call them to make sure that is indeed the cable.
73 -Ant NU1U
On Tue, Jun 1, 2021 at 5:12 PM Les Rayburn [email protected] wrote:
Does anyone make a pre-made interface cable to go between the Yaesu G-5400B and the Fox Delta ST2 Satellite Tracking Interface?
My failing eyesight have turned the joy of soldering and kit-making into a major league pain. :-(
I’d also be happy to pay someone that might be willing to make up the cable. Thanks in advance.
73,
Les Rayburn, N1LF Maylene, AL EM63nf AMSAT #38965, ARRL Life Member, CVHS Life Member, SVHF Member
Powered by *Mailbutler https://www.mailbutler.io/?utm_source=watermark&utm_medium=email&utm_campaign=watermark-essential-email*, the email extension that does it all
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected] To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Les:
I think this part does what you need: http://vibroplex.com/contents/en-us/p243.html It's an 8 pin DIN cable with bare ends for the G-5500/5400 rotator control box. If I recall correctly, the ST-2 uses a 8-pin screw terminal block (yes: https://www.foxdelta.com/products/st2-0417.htm). So the tricky part (wiring up the DIN connector) is done for you. A volt-ohm meter will answer which wire is which pin. On the ERC interface, the end user wires up a DB9 connector. (Who can still manage to get the pin numbering backwards. Learned the hard way! With the ST-2, a screwdriver is easier to fix such boo-boos vs desoldering a DB9.)
Hope this helps.
73 Steve KS1G
On Tue, Jun 1, 2021 at 8:04 PM Ant Lefebvre [email protected] wrote:
Les,
Looks like this guy is what you are looking for. It is a bit costly.
https://www.dxengineering.com/parts/etx-ars-azeldin8?seid=dxese1&gclid=C...
Else if you wanted to mail me the DIN-8 socket connector that came with the rotator or the Fox Delta, I can solder it to a spare Cat5e cable I have lying around the house and mail it back. If time is of the essence, you'll want to go with DXengineering. ;) Just call them to make sure that is indeed the cable.
73 -Ant NU1U
On Tue, Jun 1, 2021 at 5:12 PM Les Rayburn [email protected] wrote:
Does anyone make a pre-made interface cable to go between the Yaesu G-5400B and the Fox Delta ST2 Satellite Tracking Interface?
My failing eyesight have turned the joy of soldering and kit-making into a major league pain. :-(
I’d also be happy to pay someone that might be willing to make up the cable. Thanks in advance.
73,
Les Rayburn, N1LF Maylene, AL EM63nf AMSAT #38965, ARRL Life Member, CVHS Life Member, SVHF Member
Thanks to everyone who offered their kind assistance.
My son is an avid user of modular synthesizers and related gear. He had an eight pin DIN cable to spare, and I was able to cut it in half yesterday, ohm out the pins with my VOM, and tin the bare wires to connect to the Fox Delta STS2.
Getting old sucks, but it beats the alternative.
73,
Les Rayburn, N1LF 121 Mayfair Park Maylene, AL 35114 EM63nf
NRC & IRCA Courtesy Program Committee Chairman Member WTFDA, MWC
Perseus SDR, Elad FDM-S2 SDR, AirSpy + Discovery, SDRPlay RSP-2 Pro, Sony XDR-F1HD [XDR Guy Modified], Dennon TU-1500RD, Sangean HDT-1X, Ray Dees RDS Decoders, Korner 9.2 Antenna, FM-6 Antenna, Kitz Technologies KT-501 Pre-amps, Quantum Phaser, Wellbrook ALA1530 Loop, Wellbrook Flag, Clifton Labs Active Whip.
“Nothing but blues and Elvis, and somebody else’s favorite song…”
Powered by Mailbutler https://www.mailbutler.io/?utm_source=watermark&utm_medium=email&utm_campaign=watermark-essential-email, the email extension that does it all
On Jun 1, 2021, at 7:02 PM, Ant Lefebvre [email protected] wrote:
Les,
Looks like this guy is what you are looking for. It is a bit costly.
https://www.dxengineering.com/parts/etx-ars-azeldin8?seid=dxese1&gclid=C... https://www.dxengineering.com/parts/etx-ars-azeldin8?seid=dxese1&gclid=CjwKCAjwtdeFBhBAEiwAKOIy57IBkT-IkowUPLxz80flw0PwLi7N3MMSYBxntIuQBw0mV70gklR2SRoCf9wQAvD_BwE
Else if you wanted to mail me the DIN-8 socket connector that came with the rotator or the Fox Delta, I can solder it to a spare Cat5e cable I have lying around the house and mail it back. If time is of the essence, you'll want to go with DXengineering. ;) Just call them to make sure that is indeed the cable.
73 -Ant NU1U
On Tue, Jun 1, 2021 at 5:12 PM Les Rayburn <[email protected] mailto:[email protected]> wrote:
Does anyone make a pre-made interface cable to go between the Yaesu G-5400B and the Fox Delta ST2 Satellite Tracking Interface?
My failing eyesight have turned the joy of soldering and kit-making into a major league pain. :-(
I’d also be happy to pay someone that might be willing to make up the cable. Thanks in advance.
73,
Les Rayburn, N1LF Maylene, AL EM63nf AMSAT #38965, ARRL Life Member, CVHS Life Member, SVHF Member
Powered by Mailbutler https://www.mailbutler.io/?utm_source=watermark&utm_medium=email&utm_campaign=watermark-essential-email, the email extension that does it all
Sent via AMSAT-BB(a)amsat.org http://amsat.org/. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/ https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected] https://mailman.amsat.org/hyperkitty/list/[email protected] To unsubscribe send an email to amsat-bb-leave(a)amsat.org http://amsat.org/ Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org https://mailman.amsat.org/
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected] To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
participants (3)
-
Ant Lefebvre -
Les Rayburn -
Stephan Greene