I was unable to reply directly.

-----Original Message----- From: Gary Sent: Saturday, August 29, 2020 11:43 AM To: Tom Lubbers K8TL k8tl@earthlink.net Subject: RE: [amsat-bb] G5400 rotator position pot.

Tom,

I hate emails that don't answer the questioned asked, but find myself doing it anyway. When I had a 5400 I was able to repair the pot. There used to be a wire that twisted as the pot turned. This wire liked to fail from repeated twisting. You may want to try replacing it.

73, Gary kk0sd

-----Original Message----- From: AMSAT-BB amsat-bb-bounces@amsat.org On Behalf Of Tom Lubbers K8TL via AMSAT-BB Sent: Saturday, August 29, 2020 11:09 AM To: AMSAT BB amsat-bb@amsat.org Subject: [amsat-bb] G5400 rotator position pot.

Anyone know a source or a replacement pot for the Yaesu G5400 azimuth rotor. That's the 500 ohm pot that measures the position.

Tom K8TL _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb