went to plug in my CW paddle to the back of my IC-910H,,, the manual shows a standard 1/4 inch phono plug,,, the back of my radio has something else... I havent turned it all the way around to see what it is, have to disconnect lots of wires,,,but it isn't a 1/4 inch plug... anyone else notice this? Bob DM33
**************It's only a deal if it's where you want to go. Find your travel deal here. (http://information.travel.aol.com/deals?ncid=aoltrv00050000000047)
Nope. Never seen the back of your radio.
W0DXZ@aol.com wrote:
went to plug in my CW paddle to the back of my IC-910H,,, the manual shows a standard 1/4 inch phono plug,,, the back of my radio has something else... I havent turned it all the way around to see what it is, have to disconnect lots of wires,,,but it isn't a 1/4 inch plug... anyone else notice this? Bob DM33
It should be a standard stereo 1/8" jack (it is on my 910H)... for a paddle, tip is dot, ring is dash, and shell is common. You have to set "paddle" from the SSB/CW "set" mode, and you can choose normal or reverse polarity, or "bug" mode.
73, George, KA3HSW
----- Original Message ----- From: W0DXZ@aol.com To: amsat-bb@amsat.org Sent: Sunday, August 31, 2008 6:01 PM Subject: [amsat-bb] IC-910H question
went to plug in my CW paddle to the back of my IC-910H,,, the manual shows a standard 1/4 inch phono plug,,, the back of my radio has something else... I havent turned it all the way around to see what it is, have to disconnect lots of wires,,,but it isn't a 1/4 inch plug... anyone else notice this? Bob DM33
participants (3)
-
George Henry -
Nigel Gunn G8IFF/W8IFF -
W0DXZ＠aol.com