How much power are you using for up link SSTV on 1268? Any one using W95sstv to receive?
Am using 10 watts from my TS-2000X into a 22 element M2INC yagi. Using HRD DM780 SSTV software (free). Very easy to use. Simon did a great job on this application and provides great support.
73, Jeff K7WIN
----- Original Message ----- From: "WCP" wcp2@mchsi.com To: amsat-bb@amsat.org Sent: Saturday, October 11, 2008 5:53 PM Subject: [amsat-bb] AO-51 SSTV
How much power are you using for up link SSTV on 1268? Any one using W95sstv to receive?
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
I have no transmit capability but I've been trying to copy some pictures. I got two from you last night Jeff that were good but it wasn't a great pass for me and I had a lot of noise. One thing I might add is that Jeff's pictures were spot on as far as what I had my receive slant adjustment set but a lot of the others I've tried to copy, the slant was way off. My receive slant adjustment has always been fine on 20 meters SSTV so I don't know what's going on there. BTW I use Chromapix which to me is still the best software out there but you do have to pay for it whereas MMSSTV and Simon's software are free. Wasn't any such thing way back when I bought Chromapix....hi hi 73, Michael, W4HIJ ----- Original Message ----- From: "K7WIN - Jeff" k7win@k7win.net To: "WCP" wcp2@mchsi.com; amsat-bb@amsat.org Sent: Saturday, October 11, 2008 9:36 PM Subject: [amsat-bb] Re: AO-51 SSTV
Am using 10 watts from my TS-2000X into a 22 element M2INC yagi. Using HRD DM780 SSTV software (free). Very easy to use. Simon did a great job on this application and provides great support.
73, Jeff K7WIN
----- Original Message ----- From: "WCP" wcp2@mchsi.com To: amsat-bb@amsat.org Sent: Saturday, October 11, 2008 5:53 PM Subject: [amsat-bb] AO-51 SSTV
How much power are you using for up link SSTV on 1268? Any one using W95sstv to receive?
----- Original Message ----- From: "WCP" wcp2@mchsi.com To: amsat-bb@amsat.org Sent: Sunday, October 12, 2008 00:53 UTC Subject: [amsat-bb] AO-51 SSTV
How much power are you using for up link SSTV on 1268? Any one using W95sstv to receive?
I'm running about 10w from my IC910. My antenna is a 12 turn helix fed through about 30 ft. of LMR-400. The resulting ERP should be about 200W. I'm using MMSSTV through a home-brew sound card interface. Steve ... AI7W
participants (4)
-
K7WIN - Jeff
-
Michael Tondee
-
Steve
-
WCP