I have a slightly updated version of FoxTelem. This is not a mandatory upgrade and you won't get a reminder message.
This includes just a couple of fixes: * Allow both Mode and Freq to be switched automatically in Find Signal mode, assuming Auto Start is on. This might be important to you if you use Find SIgnal and you want to track Fox-1E and the existing Fox spacecradft * Support a 12kHz IF for BPSK as requested by SatNogs. This will allow the IF from the SatNogs receiver to be decoded, including any recordings that are made by SatNogs ground stations. * Display correct error messages on WOD tab when T0 or keps not available
If those are important to you then feel free to upgrade.
The release is available here:
http://amsat.us/FoxTelem/windows/FoxTelem_1.09n5_windows.zip http://amsat.us/FoxTelem/linux/FoxTelem_1.09n5_linux.tar.gz http://amsat.us/FoxTelem/mac/FoxTelem_1.09n5_mac.tar.gz
If you are upgrading from 1.09n3 then you only need to replace the jar file. If you know how to do that, then the jar file is here: http://amsat.us/FoxTelem/test/FoxTelem.jar
If you have questions then feel free to send me an email.
73 Chris
If you ordered an SD card from the AMSAT store after about December 14, you will get this new version. (I have delayed filling orders for a few days knowing that this upgrade was coming). I have also delayed uploading a new SD card image to burnsfisher.com/AMSAT also, but that will happen in a few days, I hope.
73,
Burns WB1FJ
On Thu, Dec 17, 2020 at 11:34 AM Chris Thompson chrisethompson@gmail.com wrote:
I have a slightly updated version of FoxTelem. This is not a mandatory upgrade and you won't get a reminder message.
This includes just a couple of fixes:
- Allow both Mode and Freq to be switched automatically in Find Signal
mode, assuming Auto Start is on. This might be important to you if you use Find SIgnal and you want to track Fox-1E and the existing Fox spacecradft
- Support a 12kHz IF for BPSK as requested by SatNogs. This will allow
the IF from the SatNogs receiver to be decoded, including any recordings that are made by SatNogs ground stations.
- Display correct error messages on WOD tab when T0 or keps not available
If those are important to you then feel free to upgrade.
The release is available here:
http://amsat.us/FoxTelem/windows/FoxTelem_1.09n5_windows.zip http://amsat.us/FoxTelem/linux/FoxTelem_1.09n5_linux.tar.gz http://amsat.us/FoxTelem/mac/FoxTelem_1.09n5_mac.tar.gz
If you are upgrading from 1.09n3 then you only need to replace the jar file. If you know how to do that, then the jar file is here: http://amsat.us/FoxTelem/test/FoxTelem.jar
If you have questions then feel free to send me an email.
73 Chris
-- Chris E. Thompson chrisethompson@gmail.com g0kla@arrl.net
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program!
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
participants (2)
-
Burns Fisher -
Chris Thompson