Hi, as far as I see the code for the FT-847 for a 141.3 sub tone is hex 08 (p. 93 of the user manual) , for the TS-2000 it is dec. 22. Therefore the entry in SubTone.SQF for a 141.3 sub tone for Icom radios, Yaesu FT-847 and Kenwood TS-2000 should be: PO-101,141.3,$08,22

73s, Erich, DK1TB

Am 02.05.2020 um 08:41 schrieb Jerry via AMSAT-BB:

Jack,

3F is the code for a 67Hz tone, so for 141.3 it should be different. Even without a subtone the sat can be accessed. Probably you are just using a 67Hz subtone because that also works.

Jerry,ON4CJQ

----- Oorspronkelijk bericht ----- Van: "amsat-bb"amsat-bb@amsat.org Aan: "amsat-bb"amsat-bb@amsat.org Verzonden: Vrijdag 1 mei 2020 21:13:02 Onderwerp: [amsat-bb] po-101 sub tone

Tom: The sub tone is as follows

PO-101,141.3,$3F,1

Hope that helps 73 JACK KC7MG _______________________________________________ Sent viaAMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings:https://www.amsat.org/mailman/listinfo/amsat-bb _______________________________________________ Sent viaAMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings:https://www.amsat.org/mailman/listinfo/amsat-bb