Fellow AMSAT members, I’m about to install a never before used G-5500 rotor, and was wondering if there is any preventive maintenance I should do to it before I put it out in Florida weather (e.g., siliconing seams, greasing gears, etc). Would appreciate any suggestions. Thanks, Joel, KI4T [email protected]
Traveling at 300,000,000 meters per second
I've been using boat trailer bearing grease and would suggest that before installing.
73, Ken, W7KKE
-----Original Message----- From: AMSAT-BB [mailto:[email protected]] On Behalf Of JOEL KANDEL Sent: Saturday, December 23, 2017 06:20 To: AMSAT [email protected] Subject: [amsat-bb] Yaesu G-5500 rotor
Fellow AMSAT members, I’m about to install a never before used G-5500 rotor, and was wondering if there is any preventive maintenance I should do to it before I put it out in Florida weather (e.g., siliconing seams, greasing gears, etc). Would appreciate any suggestions. Thanks, Joel, KI4T [email protected]
Traveling at 300,000,000 meters per second
_______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Joel, I also live in Florida and know what the salt air does to metal. I replaced all the case bolts with stainless steel ones. Lowes or Homedepot has them. Note, being that stainless steel and aluminum are dissimilar metals you must use anti-seize compound on the bolts so they don't seize up in the aluminum case. You can find it at any auto parts store. It comes in a small squeeze tube and is called - Permitex aluminum anti-seize lubricant.
Michael KC4ZVA EL98
On Dec 23, 2017, at 9:20 AM, JOEL KANDEL [email protected] wrote:
Fellow AMSAT members, I’m about to install a never before used G-5500 rotor, and was wondering if there is any preventive maintenance I should do to it before I put it out in Florida weather (e.g., siliconing seams, greasing gears, etc). Would appreciate any suggestions. Thanks, Joel, KI4T [email protected]
Traveling at 300,000,000 meters per second
_______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
participants (3)
-
JOEL KANDEL -
Ken Swaggart -
Mvivona