Some background first. Flex Radio uses a version of Virtual Audio Cable (VAC) called DAX with their current rigs. In the past, almost every WIN10 upgrade trashed the DAX installation which then needed to be laboriously manually repaired. Recently, that issue has been reported resolved.
Has anybody had any issues with WIN10 upgrades with general VAC installed, especially recently? I have heard of one case, but not recently. I know there are some other equivalent packages, but for operational reasons need to stick with VAC.
73,
Alan WA4SCA
-----------------------------------
Freedom is the freedom to say that two plus two make four. If that is granted, all else follows.
George Orwell in "1984"
Hi Alan,
No problems here with latest Win10 upgrades, VAC and SDR Console.
Happy New Year,
Stefan VE4SW
On Thu, Dec 26, 2019 at 7:31 AM Alan via AMSAT-BB [email protected] wrote:
Some background first. Flex Radio uses a version of Virtual Audio Cable (VAC) called DAX with their current rigs. In the past, almost every WIN10 upgrade trashed the DAX installation which then needed to be laboriously manually repaired. Recently, that issue has been reported resolved.
Has anybody had any issues with WIN10 upgrades with general VAC installed, especially recently? I have heard of one case, but not recently. I know there are some other equivalent packages, but for operational reasons need to stick with VAC.
73,
Alan WA4SCA
Freedom is the freedom to say that two plus two make four. If that is granted, all else follows.
George Orwell in "1984"
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
I always have issues with Win10 updates but nothing affecting any of the Flex software since their upgrade that resolved the issue.
Dave N2OA
Hi Alan. I don't recall ever having any Win10 issues with SmartSDR or PowerSDR using DAX except recently when I installed the update for the v3.x s/w that I tried to install here last May and had to go back to v2.xx because of SmartSDR crashes. I did notice that when I installed the v3.x update I had to redo the DAX configuration, no big deal. I did take a Win10 update a few days ago and there were no issues with DAX afterwards...
73 Jeff kb2m
-----Original Message----- From: AMSAT-BB [email protected] On Behalf Of Alan via AMSAT-BB Sent: Thursday, December 26, 2019 8:29 AM To: AMSAT-BB [email protected] Subject: [amsat-bb] VAC and WIN10 upgrades
Some background first. Flex Radio uses a version of Virtual Audio Cable (VAC) called DAX with their current rigs. In the past, almost every WIN10 upgrade trashed the DAX installation which then needed to be laboriously manually repaired. Recently, that issue has been reported resolved.
Has anybody had any issues with WIN10 upgrades with general VAC installed, especially recently? I have heard of one case, but not recently. I know there are some other equivalent packages, but for operational reasons need to stick with VAC.
73,
Alan WA4SCA
-----------------------------------
Freedom is the freedom to say that two plus two make four. If that is granted, all else follows.
George Orwell in "1984"
_______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Thanks to all who replied. Looks like there is no problem with VAC and at least the latest WIN10 upgrades.
73,
Alan WA4SCA
participants (4)
-
Alan -
Dave -
Jeff -
Stefan Wagener