Have you turned Set menu #57 (9600bps mode) to ON?

73, Drew KO4MA

-----Original Message-----

From: Frank Westphal k6fw1@verizon.net Sent: Feb 8, 2016 4:25 PM To: amsat-bb@amsat.org Subject: [amsat-bb] IC-9100 AO-85 Telemetry

I have been unable to copy any telemetry from AO-85. I read that a cable from Data2 Port of the IC-9100 to the sound card input on a PC was all that was needed to copy the data. I have wired a cable from pin 4 9600 bps Data Out of the 9100 to the tip of the sound card input and from Pin 2 ground of the 9100 to the sleeve of the sound card input. I have selected the correct sound card from the FOX Telem software and depress the start button. I have not copied one single packet with this setup.

Has anyone been successful using a IC-9100 and a sound card to copy the data? Any ideas what I could try?

Thanks for any help.

73, Frank K6FW _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb