Hello to everyone Is it possible to use SatPC32 12.8a without auto Doppler correction? I use 2 separate transceiver one for uplink the other for downlink,all I want to do is be able to change the downlink freq. and let the uplink follow according to the Doppler sqf file.I want no automatic Doppler correction just transparent tuning. Thanks to all who read this Howard VE4ISP
Follow up to my last post So really what I want to do is to make 2 tranceiver,to act like a FT847,FT736,IC910,etc. Thanks again Howard VE4ISP
----- Original Message ----- From: "Howard Kowall" hkowall@shaw.ca To: "AMSAT-BB@amsat.org" amsat-bb@amsat.org Sent: Tuesday, November 17, 2009 3:06 PM Subject: [amsat-bb] SatPC32 Auto Doppler
Hello to everyone Is it possible to use SatPC32 12.8a without auto Doppler correction? I use 2 separate transceiver one for uplink the other for downlink,all I want to do is be able to change the downlink freq. and let the uplink follow according to the Doppler sqf file.I want no automatic Doppler correction just transparent tuning. Thanks to all who read this Howard VE4ISP
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Hello Howard, you can not explicitely disable automatic Doppler correction but leave transparent tuning enabled. The only "trick" I know is: Select a geostat. satellite that is in range for you (i.e. LES 9). The Doppler shift will be close to 0 and the Doppler shift change will be (almost) 0. In Doppler.SQF enter a data line with the wanted basic frequencies. I tested ASTRA 1A (audible in Europe) which I added to group "Geostat" in menu "Satellites". The Doppler shift on UHF is about 30 Hz and almost no changes.
73s, Erich, DK1TB
----- Original Message ----- From: "Howard Kowall" hkowall@shaw.ca To: "AMSAT-BB@amsat.org" amsat-bb@amsat.org Sent: Tuesday, November 17, 2009 10:16 PM Subject: [amsat-bb] Re: SatPC32 Auto Doppler
Follow up to my last post So really what I want to do is to make 2 tranceiver,to act like a FT847,FT736,IC910,etc. Thanks again Howard VE4ISP
----- Original Message ----- From: "Howard Kowall" hkowall@shaw.ca To: "AMSAT-BB@amsat.org" amsat-bb@amsat.org Sent: Tuesday, November 17, 2009 3:06 PM Subject: [amsat-bb] SatPC32 Auto Doppler
Hello to everyone Is it possible to use SatPC32 12.8a without auto Doppler correction? I use 2 separate transceiver one for uplink the other for downlink,all I want to do is be able to change the downlink freq. and let the uplink follow according to the Doppler sqf file.I want no automatic Doppler correction just transparent tuning. Thanks to all who read this Howard VE4ISP
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (2)
-
Erich Eichmann -
Howard Kowall