The DLP-USB232M uses a standard FTDI chip. Normally any version of Windows will have a version installed, but you can download it from FTDI.COM.

Just to make sure, you can install either the RS232 chip or the USB chip in the LVB, but not both at the same time.

73s,

Alan WA4SCA

<-----Original Message----- <From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of James <Jipping <Sent: Wednesday, August 16, 2017 02:57 AM <To: amsat bb amsat-bb@amsat.org <Subject: [amsat-bb] Making LVB Tracker USB work on W10 < <I have a LVB Tracker /usb version. My HP8100 computer operating W10 <finds the DLP-USB232M device but has no driver. Where can I get the <proper driver? < <When I interface the tracker to the computer via RS232 comport the <Satpc32 rotor control program cannot get elevation and azimuth values <from the tracker. < <Likewise, when I use a USB to RS232 convertor, my computer finds the <device, installs a driver, but the control program cannot get values. < <I have setup the rotor in SATPC32 to the correct com port and do not get <the error message when the com port is not properly set. < <HELP! < <Jim Jipping, W8MRR, AMSAT 5512 (old geezer) < <_______________________________________________ <Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available <to all interested persons worldwide without requiring membership. Opinions <expressed <are solely those of the author, and do not reflect the official views of AMSAT- <NA. <Not an AMSAT-NA member? Join now to support the amateur satellite <program! <Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb