Hello Vincenzo,

On WispDDE you can set/change band limits within Radio Settings / Radio Index / Auto Selection Configuration

There you can set Freq.ranges in MHz or 'ALL'

Select 'ALL', so you can set through wispDDE any frequency including Weather Sats.

If your TS-2000 or whatever rig you use accepts 137 MHz then you can set frequency for Weather Sats through http://amsat.org.ar/pass.exe or any other program you use.

73, lu7abf, Pedro

On Sun, Dec 25, 2016 at 8:14 AM, Vincenzo Mone vimone@alice.it wrote:

Hi folks,

I am trying the WispDDE client to set the radio frequencies for a Kenwood TS-2000.

I've noticed that when I have a NOAA and METEOR satellite, the frequency is not configured properly,

but it affirms me on the radio with a frequency of only three digits or it does not set the frequencies.

Any help how to do it or can suggest me other clients that I can interface with Orbitron or Pass setting correctly all the satellites?

Thanks and Merry Christmas to all

73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520

  *******************************************
  ******   GSM  +39 328 7244294  ******
  *****     SMS  +39 328 7244294   *****
  *******************************************

---

Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb